Loading ...
Loading ...
Loading ...
36
English
Installation Procedure
Installation Procedure
Optional: Fixing the outdoor unit to a wall with
a rack
Anchor bolt
Designed to cut off residual vibration from
outdoor unit to rack. (not supplied with product)
S
oft rubbe
r designed to cut off vibration from rack to wall.
(not supplied with product)
Base surf
ac
e
20 mm
• Install a proper grommet in order to reduce noise
and residual vibration transferred by the outdoor unit
towards the wall.
CAUTION
• When installing an air guide duct, be sure to check the
following:
– The screws do not damage the copper pipe.
– The air guide duct is fixed firmly on the guard fan.
Step 2 Unpacking
Unpacking the indoor unit
1 Open the indoor unit package.
2 Remove the top and middle cushions.
3 Remove the bottom cushion.
Unpacking the outdoor unit
1 Pull out the outdoor unit from the package.
2 Remove the top cushion.
3 Remove the 4 screws from the wooden pallet.
4 Remove the wooden pallet.
Step 3 Checking and preparing accessories
The following accessories are supplied with the air
conditioner. Their type and quantity may differ depending on
the specifications.
Accessories in the indoor unit package
Fixing bracket for indoor unit (1) Remote control (1)
Installation manual (1) Remote control holder (1)
Batteries for remote control (2) Insulation for piping(1)
M4 X L12 screws (4) M4 X L14 screws (4)
Pipe outlet protection rubber (1) Insulation for drain hose (1)
Accessories in the outdoor unit package
Drain cap (3) Drain plug out (1)
Rubber leg (4)
DB68-11731A-02_IBIM_PAC Mirage Cooling Only_TC_EN_.indd 36DB68-11731A-02_IBIM_PAC Mirage Cooling Only_TC_EN_.indd 36 2023-07-19 오전 9:52:162023-07-19 오전 9:52:16
Loading ...
Loading ...
Loading ...