Loading ...
Loading ...
Loading ...
En-10
1
Press or during operation to set the timer.
(ONtimer): TheunitturnsONatthesettime.
(OFFtimer): TheunitturnsOFFatthesettime.
* or blinks.
*
Make sure that the current time and day are set correctly.
Page 5
2
Press (forward)and (backward)tosetthe
time of timer.
Eachpresschangesthesettime10minutesforward/backward.
• Set the timer while
or isblinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together. markindicatestheorderoftimer
operations.
• If power failure occurs while ON/OFF timer is set, see page10 “Auto restart
function”.
TIMER OPERATION (ON/OFF TIMER)
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch(E.O.SW)ontheindoorunit.
Each time the E.O.SW is pressed, the operation changes in
the following order:
If a power failure occurs or the main power is turned off during operation, “Auto
restart function” automatically starts operation in the same mode as the one set
with the remote controller just before the shutoff of the main power. When timer is
set, timer setting is cancelled and the unit starts operation when power is resumed.
If you do not want to use this function, please consult the service repre-
sentative because the setting of the unit needs to be changed.
Note:
• Therst30minutesofoperationistestrun.Temperaturecontroldoesnot
work,andfanspeedissettoHigh.
• In the emergency heating operation, the fan speed gradually rises to blow out
warm air.
• In the emergency cooling operation, the horizontal vanes’ position will be
reset in about a minute, then the operation will start.
EMERGENCY OPERATION
AUTO RESTART FUNCTION
Operation indicator lamp
Settemperature:24°C
Fan speed : Medium
Horizontal vane : Auto
Emergency COOL
Emergency HEAT
Stop
JG79Y723H02.indd 10 2020/10/26 14:05:45
Loading ...
Loading ...
Loading ...