Loading ...
Loading ...
Loading ...
- 21 -
POWER
Turn the appliance ON/OFF.
NOTE: Make sure the main switch on the top of fireplace is turned on
before operating.
DIMMER
Control Flame brightness.
5 Settings: (L1-L2-L3-L4-L5) Flame dims from L1 to L5. L5 is the brightest
setting.
NOTE: Long-press the "DIMMER" button for 6 seconds, the appliance will
go into sleep mode. All the lights off, the heating function goes on.
Long-press for 6 seconds again, the appliance will back to normal mode.
TIMER
Control the Timer.
8 Settings: (1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h) Press button until reach desired
setting.
FLAME SPEED
Control Flame speed.
5 Settings: (V1-V2-V3-V4-V5) Flame speed from V1 to V5. V5 is the fastest
setting.
HEATER
Control the Heater.
Press button to initiate the heater.
(OFF) no heater or blower.
( - ), heater blows warm air(750W)
( -- ), heater blows hot air(1500W)
NOTE: Heater functions cycle from (OFF) ( - )( -- )
COLOR A
Control the flame color.
12 Settings: 1.red 2.yellow 3.blue 4.white 5.red & yellow 6.red &
blue7.red & white 8.yellow & blue 9. yellow & white 10.blue & white
11.red & yellow & blue 12.multicolor
NOTE: When you press the button for 6 seconds until you hear a beep,
the indicator will show digital "0", the flame color and brightness will be
changed automatically.
COLOR B
Control the flame bed color.
12 Settings: 1.red 2.gentian blue 3.green 4.pink 5.yellow 6.cyan 7.purple
8.white 9.saffron 10.sky blue 11.verdant 12.capri blue
NOTE: When you press the button for 6 seconds until you hear a beep,
the indicator will show digital "0", the flame color and brightness will be
changed automatically.
WARNING: Do not move or remove the mesh trim panel, when the appliance is plugged in and operating. This
will cause the remote control and touch panel to no longer function.
NOTICE: When the heater is first turned on, a slight odor may be present. This is normal and should not occur
again unless the heater is not used for a long period of time.
NOTICE: To improve operation, aim the remote control at the front of the fireplace. DO NOT press the buttons
too quickly. Give the unit time to respond to each command.
Loading ...
Loading ...
Loading ...