Loading ...
Loading ...
Loading ...
- 14 -
Step 2. Removing the Mounting Bracket
- Unscrew the two screws by Phillips screwdriver from both ends (Do not discard them), then remove the
pre-attached mounting bracket.
Step 3. Choosing a Wall Location
- Find a safe location. Minimum clearance from the ceiling and
the mantel must be at least 8 inches (200mm); minimum
clearance from the front must be at least 3 feet (900 mm). Choose
a location near an outlet so an extension cord is not required.
Note: DO NOT position the unit directly below a power outlet.
See Safety Information on pages 2 and 3 for more warnings
about placement, installation, and use of this product.
Step 4. Drilling the Holes and attaching the Mounting Bracket
- Use a level to align the bracket and mark the holes which need to be drilled with a pencil.
- Drill 3-10 (according to the model you have bought) 7/25 in. (7mm) holes in the wall.
- Insert the wall anchors into the holes using a hammer.
- Attach the mounting bracket to the wall by fastening the Anchor Screws (Part D) into the wall anchors (Part
E).
Loading ...
Loading ...
Loading ...