Loading ...
Loading ...
Loading ...
- 11 -
Follow all National and local electrical codes.
1. The heaters should be installed only using the mounting brackets we provided if you want to mount it.
2. The heater must not be recessed in the ceiling. There must be enough space around the top of the heater to
ensure adequate ventilation.
3. The heater should be at least 60 cm away from any surrounding walls.
4. A distance of at least 90 cm should always be left in front of the heaters to ensure safety.
5. The Heater must not be located either directly below, or in front of a socket-outlet.
6. The heater must be installed so as to prevent any control switches being able to be touched by anyone who
is in the shower or bath.
7. Make sure that there is no possibility of inflammable material, combustible material or curtains coming into
contact with the heater, there is a risk of fire if this happens.
8. DO NOT LEAVE THE HEATER UNATTENDED DURING USE.
3.1 UNPACKING AND TESTING APPLIANCE WALL
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance
operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet.
3.2 GROUNDING APPLIANCE
This appliance is for use on 120 Volts. The cord has a plug as shown in (A). An
adapter as shown in (C) is available for connecting three-blade grounding type
plugs to two-slot receptacles. The green grounding lug extending from the
adapter must be connected to a permanent ground such as a properly
grounded outlet box. The adapter should not be used if a three-slot grounded
receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
3.0 INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...