Loading ...
Loading ...
Loading ...
- 16 -
Step 7. Placing the Decorations
- Carefully place crystal (together with the appliance) or other decoration
into the bottom tray on the front of the appliance as illustrated.
NOTE: Media bed kits may have sharp edges, wear safety glasses and
gloves when handling.
- Lock the bracket at both ends with a screw to ensure a solid combination of the fireplace and bracket.
- To ensure the safety of use, fasten the two screws (Part D) in each left and right opening.
Step 8. Hanging the Glass Frame
- Connect the data cable connector before hanging the glass frame
on the appliance.
- Gently push on the glass panel by aligning the 4 hooks until it snaps
into position (sinks down 1-2 cm).
- Secure the glass panel with the screw removed in Step 1 (or part B).
Step 1. Removing the Glass Frame
Step 2. Removing the Mounting Bracket
（Step 1 and Step 2 please refer to page 13-14 same as Wall Hanging Installation.）
Installation - Built in Construction
Loading ...
Loading ...
Loading ...