Hikvision DS-K3Y220LX User Manual

Loading ...

Click OK.

Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.

Congure Parameters for Lane Controller

Aer adding the lane controller to the client, you can congure its parameters for passing through

the lane.

Steps

Click Access Control → Advanced

Funcon → Device Parameter to enter Parameter Sengs

page.

In the device list on the le, select a lane controller and you can edit the lane controller's

parameters on the right.

Edit the parameters.

Passing Mode

Select the controller which will control the barrier status of the device.

●

If you select According to DIP

Sengs, the device will follow the lane controller's DIP

sengs to control the barrier. The sengs on the soware will be invalid.

●

If you select According to Door's Schedule

Sengs, the device will follow the sengs of

the soware to control the barrier. The DIP sengs of the lane controller will be invalid.

Enable Free Passing Authencaon

If you enable this funcon, when both entrance and exit's barrier mode is Remain Open, the

pedestrians should

authencate each me passing through the lane. Or an alarm will be

triggered.

Alarm Voice Prompt Time Duraon

Set how long the audio will last, which is played when an alarm is triggered .

Note

0 refers to the alarm audio will be played unl the alarm is ended.

Temperature Unit

Select the temperature unit that displayed in the device status.

Motor Rotaon Direcon

Set the motor rotaon as Clockwise or Anclockwise. The motor rotaon direcon is the

barrier's open direcon.

Note

●

For single pedestal scenario, the motor rotaon direcon should set as Clockwise.

●

For mulple pedestals scenario, standing at the entrance, the motor rotaon direcon

from right to le should set as: Clockwise, Anclockwise, Clockwise, etc. respecvely.

DS-K3Y220(L)X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y220LX Value Flap Barriers