Hikvision DS-K3Y220LX Value Flap Barriers User Manual

DS-K3Y220(L)X Series Flap Barrier

User Manual

Legal Informaon

About this Document

●

This Document includes instrucons for using and managing the Product. Pictures, charts,

images and all other

informaon hereinaer are for descripon and explanaon only.

●

The

informaon contained in the Document is subject to change, without noce, due to

rmware updates or other reasons. Please nd the latest version of the Document at the

Hikvision website ( hps://www.hikvision.com ). Unless otherwise agreed, Hangzhou Hikvision

Digital Technology Co., Ltd. or its aliates (hereinaer referred to as "Hikvision") makes no

warranes, express or implied.

●

Please use the Document with the guidance and assistance of professionals trained in

supporng the Product.

About this Product

●

This product can only enjoy the aer-sales service support in the country or region where the

purchase is made.

●

If the product you choose is a video product, please scan the following QR code to obtain the

"Iniaves on the Use of Video Products", and read it carefully.

Acknowledgment of Intellectual Property Rights

●

Hikvision owns the copyrights and/or patents related to the technology embodied in the

Products described in this Document, which may include licenses obtained from third pares.

●

Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part

of this Document may be excerpted, copied, translated, or modied in whole or in part by any

means without

wrien permission.

●

and other Hikvision's trademarks and logos are the properes of Hikvision in

various

jurisdicons.

●

Other trademarks and logos menoned are the properes of their respecve owners.

LEGAL DISCLAIMER

●

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS

IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR

DS-K3Y220(L)X Series Flap Barrier User Manual

IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.

IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR

LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSS.

●

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED.

●

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF

HUMAN RIGHTS ABUSES.

●

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE

LATTER PREVAILS.

Data

Protecon

●

To protect data, the development of Hikvision Products incorporates privacy by design

principles. For example, for Products with facial

recognion features, biometrics data is stored in

your Products with encrypon method; for ngerprint Products, only ngerprint template will be

saved, which is impossible to reconstruct a

ngerprint image.

●

As a data controller/processor, you may process personal data, including collecon, storage, use,

processing, disclosure,

deleon, etc. You are advised to pay aenon to and comply with

applicable laws and regulaons related to the protecon of personal data, including without

limitaon, conducng security controls to safeguard personal data, such as, implemenng

reasonable administrave and physical security controls, conduct periodic reviews and the

assessments of the

eecveness of your security controls.

DS-K3Y220(L)X Series Flap Barrier User Manual

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable

protecon against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful

interference to radio communicaons. Operaon of this equipment in a residenal area is likely to

cause harmful interference in which case the user will be required to correct the interference at his

own expense.

FCC

Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve

2011/65/EU

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment,

or dispose of it at designated

collecon points. For more informaon see:

www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentaon for specic baery informaon. The baery is marked with this

symbol, which may include

leering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the

baery to your supplier or to a designated

collecon point. For more informaon see:www.recyclethis.info

DS-K3Y220(L)X Series Flap Barrier User Manual

iii

This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to

the following two condions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operaon of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence.

L'exploitaon est autorisée aux deux condions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2)

l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est suscepble d'en compromere le fonconnement.

COMPLIANCE NOTICE

The thermal series products might be subject to export controls in various countries or regions,

including without limitaon, the United States, European Union, United Kingdom and/or other

member countries of the Wassenaar Arrangement. Please consult your professional legal or

compliance expert or local government authories for any necessary export license requirements if

you intend to transfer, export, re-export the thermal series products between

dierent countries.

DS-K3Y220(L)X Series Flap Barrier User Manual

Safety Instrucon

These instrucons are intended to ensure that user can use the product correctly to avoid danger

or property loss.

The

precauon measure is divided into Dangers and Cauons:

Dangers: Neglecng any of the warnings may cause serious injury or death.

Cauons: Neglecng any of the cauons may cause injury or equipment damage.

Dangers: Follow these safeguards to prevent

serious injury or death.

Cauons: Follow these precauons to prevent

potenal injury or material damage.

Danger:

●

In the use of the product, you must be in strict compliance with the electrical safety regulaons

of the naon and region.

●

The equipment must be connected to an earthed mains socket-outlet.

●

Shock hazard! Disconnect all power sources before maintenance.

●

Do not touch the bare metal contacts of the inlets

aer the circuit breaker is turned o.

Electricity sll exists.

●

indicates hazardous live and the external wiring connected to the terminals requires

installaon by an instructed person.

●

Keep body parts away from fan blades. Disconnect the power source during servicing.

●

Keep body parts away from motors. Disconnect the power source during servicing.

●

To prevent possible hearing damage, do not listen at high volume levels for long periods.

●

All the electronic

operaon should be strictly compliance with the electrical safety regulaons,

re

prevenon regulaons and other related regulaons in your local region.

●

Do not connect several devices to one power adapter as adapter overload may cause over-heat

re hazard.

●

Please make sure that the power has been disconnected before you wire, install or dismantle the

device.

If the top caps should be open and the device should be powered on for maintenance, make

sure:

1. Power

o the fan to prevent the operator from geng injured accidentally.

2. Do not touch bare high-voltage components.

3. Make sure the switch’s wiring sequence is correct

aer maintenance.

●

Please make sure that the power has been disconnected before you wire, install or dismantle the

device.

●

When the product is installed on wall or ceiling, the device shall be

rmly xed.

●

If smoke, odors or noise rise from the device, turn

o the power at once and unplug the power

cable, and then please contact the service center.

DS-K3Y220(L)X Series Flap Barrier User Manual

●

Do not ingest baery, Chemical Burn Hazard.

This product contains a coin/buon cell baery. If the coin/buon cell baery is swallowed, it

can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used

baeries away from children. If the baery compartment does not close

securely, stop using the product and keep it away from children. If you think

baeries might have

been swallowed or placed inside any part of the body, seek immediate medical

aenon.

●

If the product does not work properly, please contact your dealer or the nearest service center.

Never aempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

●

Operaon of this equipment in a residenal environment could cause radio interference.

●

The device do not support the PoE network switch. Connecng with the PoE network switch may

damage the control board.

Cauons:

●

The equipment shall not be exposed to dripping or splashing and that no objects lled with

liquids, such as vases, shall be placed on the equipment.

●

Ensure correct wiring of the terminals for connecon to an AC mains supply.

●

The equipment has been designed, when required, modied for connecon to an IT power

distribuon system.

●

idenes the posive terminal(s) of equipment which is used with, or generates direct current.

+ idenes the negave terminal(s) of equipment which is used with, or generates direct

current.

●

No naked

ame sources, such as lighted candles, should be placed on the equipment.

●

This equipment is suitable for mounng on concrete or other non-combusble surface only.

●

Install the equipment according to the

instrucons in this manual.

●

To prevent injury, this equipment must be securely aached to the oor/wall in accordance with

the

installaon instrucons.

●

The main element of the turnsle is stainless steel, which is rustless (anoxidant) and corrosion

resistant (The

an corrosion ability in the medium of acid, alkali, and salt). In order to keep the

stainless steel from being oxidized or corroded, you should clean and care the turnsle surface

periodically.

The

instrucons and ps for maintaining the turnsle are as follows:

○

Select dierent stainless steel types according to the variety of the environments. You can

select 304 stainless steel for common circumstances and 316 stainless steel for the scenarios

of seasides and chemical plants.

○

Keep the device surface clean and dry.

○

Use non-woven cloth and ethyl alcohol to clean the dirt on the device surface.

○

Use sourcing pad (do not use mesh cleaning ball) to clean the rust on the device surface by

following the wire drawing on the stainless steel. And then use non-woven cloth and stainless

steel cleaner to wipe the device surface.

○

Clean and maintain the device by using non-woven cloth and stainless steel cleaner

periodically. It is suggest to clean the device every month in common circumstances and every

week for severe environments (seaside and chemical plants for instance.

DS-K3Y220(L)X Series Flap Barrier User Manual

●

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places

subject to shock (ignorance can cause equipment damage).

●

Do not place the device in extremely hot (refer to the

specicaon of the device for the detailed

operang temperature), cold, dusty or damp locaons, and do not expose it to high

electromagnec radiaon.

●

The device cover for indoor use shall be kept from rain and moisture.

●

Exposing the equipment to direct sun light, low

venlaon or heat source such as heater or

radiator is forbidden (ignorance can cause

re danger).

●

Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the

same me.

●

Please use the provided glove when open up the device cover, avoid direct contact with the

device cover, because the acidic sweat of the ngers may erode the surface coang of the device

cover.

●

Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

●

Please keep all wrappers

aer unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportaon without the

original wrapper may result in damage on the device and lead to

addional costs.

●

Improper use or replacement of the baery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used

baeries according to the instrucons provided by

the baery manufacturer.

●

Biometric

recognion products are not completely applicable to an-spoong environments. If

you require a higher security level, use mulple authencaon modes.

●

Do not stay in the lane when the device is reboong.

●

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS.

●

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.

●

The

instrucons shall require connecon of the equipment protecve earthing conductor to the

installaon protecve earthing conductor.

DS-K3Y220(L)X Series Flap Barrier User Manual

vii

Available Models

Product Name Model Descripon

Flap Barrier DS-K3Y220LX-L1 Le Pedestal 1

DS-K3Y220LX-L2 Le Pedestal 2

DS-K3Y220LX-M1 Middle Pedestal 1

DS-K3Y220LX-M2 Middle Pedestal 2

DS-K3Y220LX-R Right Pedestal

DS-K3Y220X-L1 Le Pedestal 1

DS-K3Y220X-L2 Le Pedestal 2

DS-K3Y220X-M1 Middle Pedestal 1

DS-K3Y220X-M2 Middle Pedestal 2

DS-K3Y220X-R Right Pedestal

You can follow the picture below to select pedestals:

DS-K3Y220(L)X Series Flap Barrier User Manual

viii

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Introducon ........................................................................................................................... 1

1.2 Main Features ........................................................................................................................ 2

Chapter 2 System Wiring ............................................................................................................ 3

Chapter 3 Installaon ................................................................................................................. 6

Chapter 4 General Wiring ........................................................................................................... 8

4.1 Components Introducon ...................................................................................................... 8

4.2 Wiring .................................................................................................................................. 10

4.3 Terminal

Descripon ............................................................................................................ 11

4.3.1 General Wiring ............................................................................................................ 11

4.3.2 Main Lane Control Board Terminal Descripon .......................................................... 12

4.3.3 Sub Lane Control Board Terminal

Descripon ............................................................ 13

4.3.4 Access Control Board Terminal Descripon ................................................................ 14

4.3.5 Main Oponal Board Terminal Descripon (Oponal) ............................................... 16

4.3.6 Sub

Oponal Board Terminal Descripon (Oponal) .................................................. 18

4.3.7 Card Reader Board Terminal Descripon .................................................................... 19

4.3.8 RS-485 Wiring ............................................................................................................. 21

4.3.9 RS-232 Wiring ............................................................................................................. 22

4.3.10 Alarm Input Wiring ................................................................................................... 22

4.3.11 Exit

Buon Wiring ..................................................................................................... 23

Chapter 5 Device

Sengs via Buon ........................................................................................ 24

5.1 Conguraon via Buon ...................................................................................................... 25

5.2 Keyfob Pairing ...................................................................................................................... 27

5.2.1 Pair Keyfob via

Buon ................................................................................................. 27

5.2.2 Pair Keyfob via DIP Switch ........................................................................................... 28

5.3 Inialize Device .................................................................................................................... 30

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 6 Acvaon ................................................................................................................. 31

6.1 Acvate via SADP ................................................................................................................. 31

6.2

Acvate Device via iVMS-4200 Client Soware ................................................................... 32

6.3 Acvate via Web Browser .................................................................................................... 33

Chapter 7 Operaon via Web Browser ...................................................................................... 34

7.1 Login .................................................................................................................................... 34

7.2 Overview .............................................................................................................................. 34

7.3 Person Management ............................................................................................................ 35

7.4 Search Event ........................................................................................................................ 37

7.5 Conguraon ....................................................................................................................... 39

7.5.1 View Device Informaon ............................................................................................. 39

7.5.2 Set Time ...................................................................................................................... 39

7.5.3 Set DST ........................................................................................................................ 40

7.5.4 Change Administrator's Password ............................................................................... 40

7.5.5 Online Users ................................................................................................................ 40

7.5.6 View Device Arming/Disarming Informaon .............................................................. 41

7.5.7 Network

Sengs ......................................................................................................... 41

7.5.8 Event Linkage .............................................................................................................. 43

7.5.9 Access Control Sengs ............................................................................................... 44

7.5.10

Turnsle .................................................................................................................... 49

7.5.11 Card Sengs ............................................................................................................. 53

7.5.12 Set Privacy Parameters .............................................................................................. 54

7.5.13 Upgrade and Maintenance ....................................................................................... 54

7.5.14 Device Debugging ..................................................................................................... 55

7.5.15 Component Status .................................................................................................... 55

7.5.16 Log Query .................................................................................................................. 56

7.5.17

Cercate Management ........................................................................................... 56

Chapter 8 Client

Soware Conguraon ................................................................................... 59

DS-K3Y220(L)X Series Flap Barrier User Manual

8.1 Conguraon Flow of Client Soware ................................................................................. 59

8.2 Device Management ............................................................................................................ 59

8.2.1 Add Device .................................................................................................................. 60

8.2.2 Reset Device Password ................................................................................................ 62

8.2.3 Manage Added Devices .............................................................................................. 63

8.3 Group Management ............................................................................................................. 64

8.3.1 Add Group ................................................................................................................... 64

8.3.2 Import Resources to Group ......................................................................................... 64

8.4 Person Management ............................................................................................................ 65

8.4.1 Add

Organizaon ........................................................................................................ 65

8.4.2 Import and Export Person Idenfy Informaon .......................................................... 65

8.4.3 Get Person Informaon from Access Control Device .................................................. 68

8.4.4 Issue Cards to Persons in Batch ................................................................................... 69

8.4.5 Report Card Loss ......................................................................................................... 69

8.4.6 Set Card Issuing Parameters ........................................................................................ 70

8.5 Congure Schedule and Template ....................................................................................... 71

8.5.1 Add Holiday ................................................................................................................. 71

8.5.2 Add Template .............................................................................................................. 72

8.6 Set Access Group to Assign Access

Authorizaon to Persons .............................................. 73

8.7

Congure Advanced Funcons ............................................................................................ 75

8.7.1 Congure Device Parameters ...................................................................................... 75

8.7.2 Congure Device Parameters ...................................................................................... 81

8.8 Door Control ........................................................................................................................ 82

8.8.1 Control Door Status ..................................................................................................... 83

8.8.2 Check Real-Time Access Records ................................................................................ 84

Appendix A. DIP Switch ............................................................................................................ 86

A.1 DIP Switch

Descripon ......................................................................................................... 86

A.2 DIP Switch Corresponded

Funcons .................................................................................... 86

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix B. Buon Conguraon Descripon .......................................................................... 87

Appendix C. Event and Alarm Type ........................................................................................... 97

Appendix D. Table of Audio Index Related Content ................................................................... 98

Appendix E. Error Code

Descripon .......................................................................................... 99

Appendix F. Communicaon Matrix and Device Command ..................................................... 100

DS-K3Y220(L)X Series Flap Barrier User Manual

xii

Chapter 1 Overview

1.1 Introducon

The ap barrier with 4 IR lights is designed to detect unauthorized entrance or exit. By adopng

the ap barrier integratedly with the access control system, person should authencate to pass

through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in

aracons,

stadiums, construcon sites, residences, etc.

DS-K3Y220(L)X Series Flap Barrier User Manual

1.2 Main Features

●

Control mode, free passing mode and prohibion mode selectable on both entering and exing

direcon.

●

The barrier will be locked or stop working when people are nipped

●

An-forced-accessing

The barrier will be locked automacally without open-barrier signal.

●

Self-detecon, Self-diagnoscs, and automac alarm

●

Audible and visual alarm will be triggered when detecng intrusion, tailgang, reverse passing,

and climbing over barrier

●

LED indicates the entrance/exit and passing status

●

Barrier is in free status when powered down; If the device is installed with lithium

baery

(oponal), the barrier remains open when powered down

●

Fire alarm passing

When the re alarm is triggered, the barrier will be open automacally for emergency

evacuaon

●

Valid passing duraon sengs

System will cancel the passing permission if a person does not pass through the lane within the

valid passing duraon

●

Adjustable indicator brightness

●

Bidireconal (Entering/Exing) lane

The barrier opening and closing speed can be

congured according to the visitor ow

●

TCP/IP network communicaon

The communicaon data is specially encrypted to relieve the concern of privacy leak

●

Permissions

validaon and an-tailgang

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 2 System Wiring

The preparaon before installaon and general wiring.

Steps

Note

●

The device should be installed on the concrete surface or other non-ammable surfaces.

●

If the installaon area is too close to the wall, make sure the distance between the pedestal and

the wall should be no less than 20 mm, or you cannot open the pedestal's top panel.

●

The dimension is as follows.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 2-1 Dimension

Draw a central line on the installaon surface of the le or right pedestal.

Draw other parallel lines for installing the other pedestals.

Note

The distance between the nearest two line is 853.5 mm.

Slot on the installaon surface and dig installaon holes. Put 6 expansion bolts of M12 × 150 for

each pedestal.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 2-2 Hole Posion and System Wiring

Bury cables. Each lane buries 1 high voltage cable and 1 low voltage cable. For details, see the

system wiring diagram of step 3.

Note

●

High voltage: AC power input

Low voltage: interconnecng cable (communicaon cable and 24 V power cable) and network

communicaon cable

●

The supplied 24 V power cable length is 4 m and the

communicaon cable length is 4 m.

●

The suggested inner diameter of the low voltage conduit is larger than 30 mm.

●

If you want to bury both of the AC power cord and the low voltage cable, the two cables

should be in separated conduits to avoid interference.

●

If more peripherals are required to connect, you should increase the conduit diameter or bury

another conduit for the external cables.

●

The external AC power cord should be double-insulated.

●

The network cable must be CAT5e or the network cable has

beer performance.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 3 Installaon

1. Before installaon, you should unlock and disassemble the pedestal.

Figure 3-1 Screw Hole

Note

Keep the disassembled components and make sure the accessories are intact.

2. Prepare for system wiring and installaon. For details, see System Wiring .

3. Place the pedestal above the embedded expansion bolt. Unscrew and remove the maintenance

door.

4. Secure the pedestal with 6 bolts (M12 × 150) and reinstall the maintenance door.

Scan the QR Code to view the accessories

introducon video.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 4 General Wiring

Note

●

When you should maintain or disassemble the high voltage modules, you should remove the

enre high voltage modules and maintain it outside the turnsle. You should unplug the cables

that connected to the peripherals before maintenance to avoid destroy of the device.

●

When disassembling the high voltage module, you should disconnect the power to avoid injury.

●

If only wiring is needed without maintenance, do not remove the high voltage modules.

●

The switch and the main lane control board are already connected. The 14 AWG cable to

connect between the AC electric supply and the switch should be purchased separately.

●

interconnecng cables are supplied: 24 V Power Cable and Communicaon Cable.

24 V Power Cable: 5 m long, which is in the middle and right pedestal.

Communicaon Cable: 4 m long, CAT5e, which is in the package of middle and right pedestal.

4.1 Components Introducon

By default, basic components of the turnsle are connected well. The pedestals can communicate

by wiring the interconnecng cables. And the turnsle supports wiring the AC electric supply for

the whole system's power supply.

Note

The voltage uctuaon of the electric supply is between 100 VAC and 240 VAC, 50 to 60 Hz.

The picture displayed below describes the serial port on the entrance and exit direcon. You

should select access control board kit for further wiring.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-1 UART Corresponded Interface

The picture displayed below describes the IR sending/receiving module and their corresponding

number on the pedestal.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-2 IR Sending/Receiving Module Posion

Note

If the turnsle contains two lanes, standing at the entrance posion, the IR modules on the le

pedestal are the IR sending modules. The IR modules on the right pedestal are the IR receiving

modules. The IR modules on the le side of the middle pedestal are the IR receiving modules,

while the IR modules on the right side of the middle pedestal are the IR sending modules.

4.2 Wiring

Scan the QR code to view the wiring video.

DS-K3Y220(L)X Series Flap Barrier User Manual

4.3 Terminal Descripon

The lane controller contains main lane controller and sub lane controller, which controls the IR

beams, motor, and other components' work.

4.3.1 General Wiring

The general wiring of lane control board, access control board and oponal board.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-3 General Wiring

Note

●

The power cable from power supply to the main lane control board has been connected. You will

need to prepare the 14 AWG power cable to connect the AC power input to power supply.

●

The supplied 2 interconnecng cables need connecng on-site:

1. 24 V power cable of 14 AWG. The cable is 4 m in length and put inside the right and middle

pedestal at the exit.

2. CAT5e

Communicaon cable. The cable is 4 m in length and put inside the package of the

right/middle pedestal.

●

The ① and ② or ③ and ④ refer to the two sides of a same board.

●

Barrier opens at the entrance/exit: connect to BTN1/BTN2 and GND.

4.3.2 Main Lane Control Board Terminal Descripon

The main lane control board contains interconnecng interface, USB ash drive interface

(reserved), access control board interface, re input interface, exit buon interface, 12 VDC output

interface (reserved), 24 VDC input interface, fan interface, communicaon interface, encoder

DS-K3Y220(L)X Series Flap Barrier User Manual

interface, power supply interface for motor, supercapacitor interface, IR adaptor interface and light

bar interface.

The picture displayed below is the main lane control board diagram.

Figure 4-4 Main Lane Control Board Terminals

4.3.3 Sub Lane Control Board Terminal

Descripon

The sub lane control board contains interconnecng interface, USB ash drive interface (reserved),

access control board interface, exit

buon interface, 12 VDC power output interface (reserved), 24

VDC power input interface, fan interface, communicaon interface, encoder interface, power

supply interface for motor, supercapacitor interface, IR adaptor interface and light bar interface.

The picture displayed below is the sub lane control board diagram.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-5 Sub Lane Control Board Terminals

4.3.4 Access Control Board Terminal

Descripon

Access control board is mainly used for authority idencaon in places with high security levels

such as public security or judicial place, external device accessing, and

communicaon with the

upper plaorm and lane controller.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

●

RS-485A corresponds to port 5 on web and is for QR code scanner connecon by default;

RS-485C corresponds to port 7 on web and is for card reader connecon by default.

●

The SOC and MCU serial port are for maintenance and debugging use only.

●

Press the Reset

buon for 5 s and the device will start to restore to factory sengs.

●

The DIP switch is for study mode

seng and keyfob paring. For detailed informaon about the

DIP switch, see

DIP Switch .

The wiring diagram of extended interface of access control board is shown as follows.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-6 Wring Diagram of Extended Interface

4.3.5 Main

Oponal Board Terminal Descripon (Oponal)

The loudspeaker board contains the sub-1G antenna interface, lane control board interface,

loudspeaker interface, debugging port, Wiegand/exit buon interface, 5 VDC output and

communicaon interface.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-7 Loudspeaker Board Terminal

DS-K3Y220(L)X Series Flap Barrier User Manual

4.3.6 Sub Oponal Board Terminal Descripon (Oponal)

Figure 4-8 Sub Oponal Board Terminal

Sub

Oponal Board Terminal Descripon

12 VDC Power Output 12VOUT 12 VDC Power Output

GND Grounding

Wiegand (Oponal)/Exit Buon BZ (Reserved) Card Reader Buzzer Control

Output

W1 (Reserved) Wiegand Head Read Data Input

Data1

W0 (Reserved) Wiegand Head Read Data Input

Data0

DS-K3Y220(L)X Series Flap Barrier User Manual

Sub Oponal Board Terminal Descripon

GND (Reserved) Grounding

BTN Access to Exit Buon

GND Grounding

RS-485/232 RS-485 B+ Corresponded to UART6

Connected with QR Code

Scanner

RS-485 B-

RS-485 D+ Correspond to UART4

Connected with Card Reader by

Default

RS-485 D-

RS-232 BT Correspond to UART2

Connected with Fingerprint

Module by Default

RS-232 BR

RS-232 CT Reserved

RS-232 CR

5 VDC Power Output 5VOUT 5 VDC Power Output

GND Connected with Ground

Communicaon Interface BUS2 Connected with Sub Lane

Control Board

BUS Interface BUS1 TO SUB Connected with Sub Lane

Control Board

4.3.7 Card Reader Board Terminal Descripon

The card reader board can be connected to the access control board via RS-485 interface.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-9 Card Reader Board

DS-K3Y220(L)X Series Flap Barrier User Manual

4.3.8 RS-485 Wiring

Note

●

There are four RS-485 interfaces, which are for connecng ID card reader, IC card reader, QR

code scanner, ngerprint and card reader, card recycler, text screen, ngerprint reader, and face

recognion terminal. Take the wiring of RS-485 card reader as an example.

●

For details about text screen, see

Conguring Screen Parameters in User Manual of iVMS-4200

AC Client

Soware.

DS-K3Y220(L)X Series Flap Barrier User Manual

4.3.9 RS-232 Wiring

Note

There are three RS-232 interfaces (UART4, UART7, and UART8). UART7 and UART8 can connect QR

code scanner, and card recycler, while UART4 can connect QR code scanner, card recycler, and face

recognion terminal.

4.3.10 Alarm Input Wiring

On the main lane control board, you can wire the re alarm input interface.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 4-10 Remaining Open

4.3.11 Exit Buon Wiring

The main and sub lane control board each has 1 buon interface, which can be connected to exit

buon or face recognion device.

Figure 4-11 Exit Buon Wiring (Entrance)

Figure 4-12 Exit Buon Wiring (Exit)

Note

●

The face recognion devices are powered via 12 VDC power output interface of the main and

sub lane control board.

●

Barrier open at the entrance: connect to BTN1 and GND.

●

Barrier open at the exit: connect to BTN2 and GND.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 5 Device Sengs via Buon

You can congure the device via buon on the main lane control board.

Funcon Main Lane Control Board Only

Working Mode

keyfob Pairing Not support

Passing Mode Congure via buon

Memory Mode Congure via buon

Parameter Sengs

Barrier Opening Speed Congure via buon

Barrier Closing Speed Congure via buon

Card Reading on the Alarm Area Congure via buon

Enter Duraon Congure via buon

Exit Duraon Congure via buon

IR Sensing Duraon Congure via buon

Intrusion Duraon Congure via buon

Overstay Duraon Congure via buon

Delay Time for Barrier Closing Congure via buon

Authencaon on Free Passing Congure via buon

Volume Adjustment Congure via buon

Barrier Material Congure via buon

Barrier Length Congure via buon

Light Brightness Congure via buon

Restore to Default Congure via buon

Voice Prompt

Climbing over Barrier Not support

Reverse Passing Not support

Exceeding Passing Duraon Not support

Intrusion Alarm Not support

DS-K3Y220(L)X Series Flap Barrier User Manual

Funcon Main Lane Control Board Only

Tailgang Alarm Not support

Overstaying Alarm Not support

Motor Inspecon Congure via buon

Self-check Voice Prompt Not support

Study Mode Voice Prompt Not support

Refer to Buon Conguraon Descripon for detailed informaon.

5.1

Conguraon via Buon

Buon Descripon

Figure 5-1 Buon

Exit Buon

●

Press to open the barrier from the entrance posion.

●

Double press to open the barrier from the exit posion.

Parameter Conguraon Buon

●

LEFT: Press to add 10 to conguraon data.

●

RIGHT: Press to add 1

conguraon data.

●

CANCEL: Return to the Level-1 menu, or exit Level-1 menu.

●

OK:

Conrm the sengs, or enter conguraon mode, or enter the Level-2 menu.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

●

Conguraon No. is displayed by two digital tubes.

●

Level-1 Menu: If the decimal point on the right is on, it indicates the Level-1 menu. The

number represents the conguraon No.

●

Level-2 Menu: If the decimal point in the middle is on, it indicates the level-2 menu. The

number represents the conguraon No.

Buon Conguraon Procedure

Figure 5-2 Procedure

Steps:

DS-K3Y220(L)X Series Flap Barrier User Manual

1. Hold OK buon for 3 s unl one beep occurs. The device enter the conguraon mode. Level 1

menu lights up. The display screen displays the conguraon No. 1.

2. In the Level-1 menu, press LEFT (plus 10) and RIGHT (plus 1) to set the conguraon No. Press

OK to save

sengs and the enter the level-2 menu. Press CANCEL to exit the current menu, or

conduct no

operaon for 5 s to cancel conguraon and exit the current menu.

Aer enter the level 2 menu, press LEFT (plus 10) and RIGHT (plus 1) to set the parameters at

your needs. Press OK to save the sengs or press CANCEL to exit the current menu, or conduct

no operaon for 5 s to cancel conguraon and exit the current menu.

Note

The conguraon No. will display in a cycle.

Each conguraon No. refers to a funcon. For details about the conguraon No. and its

related funcon, see Buon Conguraon Descripon .

Example

If you want to pair keyfobs via the buon. Hold OK for 3 s unl you hear one beep. The device

enters the

conguraon mode and the level 1 decimal point lights up. The display screen will

display the No. 1.

In the Level-1 menu, press Right (plus 1) to adjust the

conguraon No. to 2. Press OK to save the

sengs and enter the Level-2 menu.

Press Right (plus 1) to adjust the conguraon No. to 2. Press OK to save the sengs.

5.2 Keyfob Pairing

Pair keyfob via buon or DIP switch.

5.2.1 Pair Keyfob via

Buon

Pair the keyfob to the device via buon to open/close the barrier remotely.

Before You Start

Ask our technique supports or sales and purchase the keyfob.

Steps

Note

●

For details about buon's operaon, see Conguraon via Buon .

●

For details about the conguraon No. and its related funcon, see Buon Conguraon

Descripon .

●

For details about the keyfob

operaon instrucons, see the keyfob's user manual.

Enter the keyfob pairing mode.

1) Enter the conguraon mode.

2) Set the conguraon No. in Level-1 to 2. The device will enter the keyfob pairing mode.

DS-K3Y220(L)X Series Flap Barrier User Manual

3) Set the conguraon No. in the Level-2 menu to 2. The device will enter the keyfob pairing

mode.

Hold the Close buon for more than 10 seconds.

The keyfob's indicator will

ash if the pairing is completed.

Exit the keyfob pairing mode.

1) Enter the conguraon mode.

2) Set the conguraon No. in Level-1 to 2. The device will enter the keyfob pairing mode.

3) Set the conguraon No. in the Level-2 menu to 1. The device will exit the keyfob pairing

mode.

Reboot the device to take

eect.

5.2.2 Pair Keyfob via DIP Switch

Pair the remote control to the device through DIP switch to open/close the barrier remotely.

Before You Start

Ask our technique supports or sales and purchase the keyfob.

Steps

Power

o the turnsle.

Set the No.2 switch of the DIP Switch on the access control board to the ON side.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 5-3 DIP Switch Locaon

Figure 5-4 Enable Keyfob Paring Mode

Power on the turnsle and it will enter the keyfob pairing mode.

Hold the Close

buon for more than 10 seconds.

The keyfob's indicator of the will ash twice if the pairing is completed.

DS-K3Y220(L)X Series Flap Barrier User Manual

Set the No.2 switch to the OFF side, and reboot the turnsle to take eect.

Note

●

Only one turnsle can pair the keyfob. If mulple turnsles are in the pairing mode, the

keyfob will select only one of them to pair.

●

For details about DIP switch value and meaning, see DIP Switch Descripon .

Oponal: Go to System → User → Keyfob User on the remote control page of the client

soware to delete the keyfob.

5.3 Inialize Device

Steps

Hold the inializaon buon on the access control board for 5 s.

Figure 5-5 Inializaon Buon Posion

The device will start restoring to factory sengs.

When the process is nished, the device will beep for 3 s.

Cauon

The inializaon of the device will restore all the parameters to the default seng and all the

device events are deleted.

Note

Make sure no persons are in the lane when powering on the device.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 6 Acvaon

You should acvate the device before the rst login. Aer powering on the device, the system will

switch to Device

Acvaon page.

Acvaon via the device, SADP tool and the client soware are supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 8000

●

The default user name: admin

6.1

Acvate via SADP

SADP is a tool to detect, acvate and modify the IP address of the device over the LAN.

Before You Start

●

Get the SADP soware from the supplied disk or the ocial website hp://

www.hikvision.com/en/ , and install the SADP according to the prompts.

●

The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to acvate a device and modify its IP address. For batch acvaon

and IP addresses modicaon, refer to User Manual of SADP for details.

Steps

Run the SADP soware and search the online devices.

Find and select your device in online device list.

Input new password (admin password) and

conrm the password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

Note

Characters containing admin and nimda are not supported to be set as acvaon password.

Click Acvate to start acvaon.

DS-K3Y220(L)X Series Flap Barrier User Manual

Status of the device becomes Acve aer successful acvaon.

Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your computer by either modifying the IP

address manually or checking Enable DHCP.

3) Input the admin password and click Modify to

acvate your IP address modicaon.

6.2

Acvate Device via iVMS-4200 Client Soware

For some devices, you are required to create the password to acvate them before they can be

added to the iVMS-4200

soware and work properly.

Steps

Note

This funcon should be supported by the device.

Enter the Device Management page.

Click on the right of Device Management and select Device.

Click Online Device to show the online device area.

The searched online devices are displayed in the list.

Check the device status (shown on Security Level column) and select an

inacve device.

Click

Acvate to open the Acvaon dialog.

Create a password in the password eld, and conrm the password.

DS-K3Y220(L)X Series Flap Barrier User Manual

Cauon

The password strength of the device can be automacally checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case leers, lower case leers, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Note

Characters containing admin and nimda are not supported to be set as acvaon password.

Click OK to acvate the device.

6.3

Acvate via Web Browser

You can acvate the device via the web browser.

Steps

Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press

Enter.

Note

Make sure the device IP address and the computer's should be in the same IP segment.

Create a new password (admin password) and conrm the password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

Note

Characters containing admin and nimda are not supported to be set as acvaon password.

Click Acvate.

Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the

client

soware.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 7 Operaon via Web Browser

7.1 Login

You can login via the web browser or the remote conguraon of the client soware.

Note

Make sure the device is acvated. For detailed informaon about acvaon, see Acvaon .

Enter the device IP address in the address bar of the web browser and press Enter to enter the

Enter the device user name and the password. Click Login.

Conguraon of Client Soware

Download and open the client soware. Aer adding the device, click to enter the Conguraon

page.

7.2 Overview

You can view the device component status, real-me event, person informaon, network status,

basic

informaon, and device capacity. You can also control the barrier remotely.

Figure 7-1 Overview

Funcon Descripons:

Device Component Status

DS-K3Y220(L)X Series Flap Barrier User Manual

You can check if the device is working properly. Click View More to view the detailed

component status.

Remote Control

/ / /

The door is opened/closed/remaining open/remaining closed.

Real-Time Event

You can view the event Employee ID, Name, Card No., Event Type, Time, and

Operaon. You can

also click View More to enter the search condions, including the event type, employee ID, the

name, the card No., the start me, and the end me, and click Search. The results will be

displayed on the right panel.

Person

Informaon

You can view the added and not added informaon of person and card.

Network Status

You can view the connected and registered status of wired network, wireless network, ISUP and

cloud service.

Basic Informaon

You can view the model, serial No. and rmware version.

Device Capacity

You can view the person and card capacity.

7.3 Person Management

Click Add to add the person's informaon, including the basic informaon, cercate,

authencaon

and sengs.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-2 Add Person

Add Basic

Informaon

Click Person Management → Add to enter the Add Person page.

Add the person's basic

informaon, including the employee ID, the person's name, the gender, and

person type.

If you select Visitor as the person type, you can set the visit

mes.

Click Save to save the sengs.

Set Permission Time

Click Person Management → Add to enter the Add Person page.

DS-K3Y220(L)X Series Flap Barrier User Manual

Enable Long-Term Eecve User, or set Validity Period and the person can only has the permission

within the congured me period according to your actual needs.

Click Save to save the sengs.

Add Card

Click Person Management → Add to enter the Add Person page.

Click Add Card, enter the Card No. and select the Property, and click OK to add the card.

Note

Up to 50 cards can be added.

Click Save to save the sengs.

Authencaon

Sengs

Click Person Management → Add to enter the Add Person page.

Set

Authencaon Type as Same as Device or Custom.

Click Save to save the sengs.

7.4 Search Event

Click Event Search to enter the Search page.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-3 Search Event

Enter the search condions, including the event type, the employee ID, the name, the card No., the

start

me, and the end me, and click Search.

The event types contain access control event and ID card event. If you choose to search for ID card

event, you will not need to enter the employee ID, the name, or the card No.

The results will be displayed on the right panel.

DS-K3Y220(L)X Series Flap Barrier User Manual

7.5 Conguraon

7.5.1 View Device Informaon

Click Conguraon → System → System Sengs → Basic Informaon to enter the conguraon

page.

You can view the device name, language, model, serial No., version, IO input, IO output, local

RS-485, alarm input, alarm output, and device capacity, etc.

You can change Device Name and click Save.

7.5.2 Set Time

Set the device's me.

Click Conguraon → System → System Sengs → Time Sengs .

Figure 7-4 Time Sengs

Click Save to save the sengs aer the conguraon.

Time Zone

Select the device located me zone from the drop-down list.

Time Sync.

NTP

DS-K3Y220(L)X Series Flap Barrier User Manual

You should set the NTP server's IP address, port No., and interval.

Manual

By default, the device me should be synchronized manually. You can set the device me

manually or check Sync. with Computer Time to synchronize the device me with the

computer's

me.

Server Address Type/Server Address/NTP Port/Interval

You can set the server address type, server address, NTP port, and interval.

7.5.3 Set DST

Steps

Click

Conguraon → System → System Sengs → Time Sengs .

Enable DST.

Set the DST start me, end me and bias me.

Click Save to save the sengs.

7.5.4 Change Administrator's Password

Steps

Click

Conguraon → System → User Management .

Click .

Enter the old password and create a new password.

Conrm the new password.

Click Save.

Cauon

The password strength of the device can be automacally checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case leers, lower case leers, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

7.5.5 Online Users

The informaon of users logging into the device is shown.

Go to Conguraon → System → User Management → Online Users to view the list of online

users.

DS-K3Y220(L)X Series Flap Barrier User Manual

7.5.6 View Device Arming/Disarming Informaon

View device arming type and arming IP address.

Go to

Conguraon → User Management → Arming/Disarming Informaon .

You can view the device arming/disarming informaon. Click Refresh to refresh the page.

7.5.7 Network Sengs

Set TCP/IP and port.

Set Basic Network Parameters

Click Conguraon → Network → Network Sengs → TCP/IP .

Set the parameters and click Save to save the

sengs.

NIC Type

Select a NIC type from the drop-down list. By default, it is Auto.

DHCP

If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default

gateway, Mac address, and MTU.

If you check the

funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4

default gateway

automacally.

DNS Server

Set the preferred DNS server and the Alternate DNS server according to your actual need.

Set Port Parameters

Set the HTTP, HTTPS, and HTTP Listening parameters.

Click

Conguraon → Network → Network Service → HTTP(S) .

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-5 Network Service

HTTP

It refers to the port through which the browser accesses the device. For example, when the

HTTP Port is

modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.

HTTPS

Set the HTTPS for accessing the browser. Cercate is required when accessing.

HTTP Listening

The device can send alarm informaon to the event alarm IP address or domain name via HTTP

protocol/HTTPS protocol. Edit the event alarm IP address or domain name, URL, port, and

protocol.

Note

The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol

to receive the alarm informaon.

DS-K3Y220(L)X Series Flap Barrier User Manual

7.5.8 Event Linkage

Set linked acons for events.

Steps

Click Conguraon → Event → Basic Event → Event Linkage to enter the page.

Figure 7-6 Event Linkage

Set event source.

If you choose Linkage Type as Event Linkage, you need to select event types from the drop-

down list.

If you choose Linkage Type as Card Linkage, you need to enter the card No. and select the

card reader.

If you choose Linkage Type as Employee ID Linkage, you need to enter the employee ID and

select the card reader.

Set linked acon.

Linked Buzzer

Enable Linked Buzzer and select Start Buzzing or Stop Buzzing for the target event.

Linked Door

Enable Linked Door, check Door 1 or Door 2, and set the door status for the target event.

Linked Alarm Output

Enable Linked Alarm Output, check Alarm Output 1 or Alarm Output 2, and set the alarm

output status for the target event.

DS-K3Y220(L)X Series Flap Barrier User Manual

7.5.9 Access Control Sengs

Set Authencaon Parameters

Click Conguraon → Access Control → Authencaon Sengs .

Note

The funcons vary according to dierent models. Refers to the actual device for details.

Figure 7-7 Set Authencaon Parameters

Click Save to save the sengs aer the conguraon.

Terminal

Choose Entrance or Exit for sengs.

Terminal Type/Terminal Model

Get terminal

descripon. They are read-only.

Enable Authencaon Device

Enable the authencaon funcon.

Authencaon

Select an authencaon mode according to your actual needs from the drop-down list.

Authencaon Interval

DS-K3Y220(L)X Series Flap Barrier User Manual

You can set the authencaon interval of the same person when authencang. The same

person can only authencate once in the congured interval. A second authencaon will be

failed.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Max. Authencaon Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Communicaon with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Note

The authencaon interval value ranges from 2 s to 255 s.

Set Door Parameters

Click Conguraon → Access Control → Door Parameters .

Figure 7-8 Door Parameters Sengs Page

Click Save to save the sengs aer the conguraon.

Door No.

Select Entrance or Exit for sengs.

Door Name

You can create a name for the door.

Open Duraon

DS-K3Y220(L)X Series Flap Barrier User Manual

Set the door unlocking duraon. If the door is not opened for the set me, the door will be

locked.

Note

The open duraon ranges from 5 s to 60 s.

Exit Buon Type

You can set the exit buon as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Open.

Door Remain Open

Duraon with First Person

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Note

The duraon ranges from 1 s to 1440 s.

Serial Port Sengs

Set serial port parameters.

Steps

Click Conguraon → Access Control → Serial Port Conguraon .

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-9 Serial Port Sengs

Set the No., Baud Rate, Data Bit, Stop Bit and Parity.

Set the Peripheral Type as Card Reader, QR Code Scanner or Disable.

You can view the serial port type, connected device model and peripheral

soware version.

Click Save.

Host Parameters

Set door contact sengs and RS-485 protocol.

Steps

Click Conguraon → Access Control → Host Parameter to enter the page.

Set door contact.

Note

You can set the door contact as Door Open Status or Door Closed Status according to your

actual needs. By default, it is Door Open Status.

Set RS-485 protocol.

Click Save.

DS-K3Y220(L)X Series Flap Barrier User Manual

Set Terminal Parameters

Set the working mode.

Steps

Set the device working mode and remote vericaon.

Figure 7-10 Working Mode and Remote Vericaon

Permission Free Mode

The device will not verify the person's permission, but only the person's validity period. If the

person is in the validity period, the barrier will open.

You can enable Verify

Credenal Locally. Aer enabling the funcon, the device will only

verify the person's permission without the schedule template, etc.

Access Control Mode

The device works normally and will verify the person's permission to open the barrier.

Remote Vericaon

When authencang, device uploads authencaon informaon to the plaorm, and

plaorm conrms whether to open the door or not.

Blocklist Authencaon

When enabling the funcon, the device will check the whether the authencang person is

in the blocklist or not.

Click Save to complete terminal parameter

sengs.

DS-K3Y220(L)X Series Flap Barrier User Manual

7.5.10 Turnsle

Basic Parameters

Set turnsle basic parameters.

Steps

Click Conguraon → Turnsle → Basic Sengs to enter the page.

Figure 7-11 Basic Parameters

View the Device Type, Device Model and Working Status.

Set Barrier Material, Lane Width, Barrier Opening Speed and Barrier Closing Speed.

Set the passing mode.

If you choose General Passing, you can select the barrier status for the entrance and exit from

the drop-down list.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

If you set barrier-free mode, the barrier remains open and will close when authencaon

fails.

If you choose Weekly Schedule, you can set a weekly schedule for entrance and exit barriers.

Click Save.

keyfob

Set keyfob patameters.

Steps

Click Conguraon → Turnsle → Keyfob to enter the page.

Figure 7-12 keyfob

View the keyfob working status.

Set Working Mode as One-to-One or One-to-Many.

Add keyfob.

1) Click Add and the keyfob adding window will pop up.

2) Enter the Name and Serial No..

3) Check to enable Remain Open Permission at your actual needs.

4) Click OK to add the keyfob.

Oponal: Select a keyfob and click Delete to delete the keyfob.

Click Save.

IR Detector

Set IR detector.

Steps

Click Conguraon → Turnsle → IR Detector to enter the page.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-13 IR Detector

Set the entrance and exit inducve mode as Single Triggered or Triggered Simultaneously.

Set custom IR detector mode.

Enable IR Emergency Mode

If some IR beams do not work properly, you can shield those IR beams to restore the lane. But

this

acon may hit person and cause injury.

Enable Custom

An-pinch for Door Closing

An-pinch for door closing refers that the barrier will not close if the device has detected

person in the lane. Only

aer the person walks out of the lane, the barrier will close. If you

enable the funcon, you can shield parts of the IR beams for closing barrier in advance. But

this

acon may hit person and cause injury.

Click Save.

People

Counng

Set people counng .

Steps

Click Conguraon → Turnsle → People Counng to enter the page.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 7-14 People Counng

Check to enable People Counng.

Enable Device Oine People Counng at your actual needs.

Select People Counng Type as Invalid, Passing Detecon or Authencaon Number.

Oponal: Click clear to clear all the people counng informaon.

Other

Sengs

Set other parameters.

Steps

Click Conguraon → Turnsle → Other Sengs to enter the page.

Set Alarm Output Duraon.

Note

The alarm output duraon ranges from 0 s to 3599 s.

Set Temperature Unit.

Check to enable Do Not Open Barrier When Lane is Not Clear.

Drag the block or enter the value to adjust the light board brightness.

Set the alarm buzzer beeping

duraon, door closing delay me, intrusion duraon, overstaying

duraon and IR obstructed duraon.

Check to enable Memory Mode at your actual needs.

Note

Mulple cards presenng for mulple person passing is allowable when enabling the memory

mode. When the passing person's number exceeds the card presenng number, or aer the

latest person passing with no other person passing within the door open duraon, the door will

automacally.

DS-K3Y220(L)X Series Flap Barrier User Manual

Choose the control mode.

So Mode

The barrier will be closed aer the person has passed through the barrier when there are

tailing, forced accessing, etc.

Guard Mode

The barrier will be closed immediately when there are tailgang, forced accessing, etc.

Set the

re input type.

10.

Click to enable Motor Self-Test and choose the main lane or sub lane to start motor self-

tesng.

11.

Click Save.

7.5.11 Card

Sengs

Set Card Security

Click Conguraon → Card Sengs → Card Type to enter the sengs page.

Set the parameters and click Save.

Enable NFC Card

In order to prevent the mobile phone from

geng the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 Card

Enable M1 card and

authencang by presenng M1 card is available.

M1 Card Encrypon

Sector

M1 card encrypon can improve the security level of authencaon.

Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is

recommended to encrypt sector 13.

Enable EM Card

Enable EM card and authencang by presenng EM card is available.

Note

If the peripheral card reader supports presenng EM card, the funcon is also supported to

enable/disable the EM card funcon.

Enable CPU Card

Enable CPU card and authencang by presenng CPU card is available.

CPU Card Read Content

Aer enable the CPU card content reading funcon, the device can read the CPU card content.

DS-K3Y220(L)X Series Flap Barrier User Manual

Enable FeliCa Card

The device can read the data from FeliCa card when enabling the FeliCa card funcon.

Set Card Authencaon Parameters

Set the card reading content when authencate via card on the device.

Go to

Conguraon → Card Sengs → Card NO. Authencaon Sengs .

Select a card authencaon mode and enable reversed card No. at your actual needs. Click Save.

7.5.12 Set Privacy Parameters

Set the event storage type.

Go to

Conguraon → Security → Privacy Sengs

The event storage type is overwring by default. The earliest 5% events will be deleted when the

system detects the stored events has been over 95% of the full space.

7.5.13 Upgrade and Maintenance

Reboot device, restore device parameters, and upgrade device version.

Reboot Device

Click Maintenance and Security → Maintenance → Restart .

Click Restart to reboot the device.

Upgrade

Click Maintenance and Security → Maintenance → Upgrade .

Select an upgrade type from the drop-down list. Click

and select the upgrade le from your

local PC. Click Upgrade to start upgrading.

If the device has been connected to Hik-Connect and network, when there is a new

installaon

package in Hik-Connect, you can click Upgrade aer Online Update to upgrade the device system.

Note

Do not power o during the upgrading.

Restore Parameters

Click Maintenance and Security → Maintenance → Backup and Reset .

Restore All

All parameters will be restored to the factory

sengs. You should acvate the device before

usage.

DS-K3Y220(L)X Series Flap Barrier User Manual

Restore

The device will restore to the default sengs, except for the device IP address and the user

informaon.

Import and Export Parameters

Click Maintenance and Security → Maintenance → Backup and Reset .

Export

Click Export to export the device parameters.

Note

You can import the exported device parameters to another device.

Import

Click and select the le to import. Click Import to start import conguraon le.

7.5.14 Device Debugging

You can set device debugging parameters.

Steps

Click Maintenance and Security → Maintenance → Device Debugging .

You can set the following parameters.

Enable SSH

To raise network security, disable SSH service. The

conguraon is only used to debug the

device for the professionals.

Print Log

You can click Export to export log.

7.5.15 Component Status

You can view the main lane and sub lane status.

Main Lane Status

Device Component

You can view the status of the access control board, lane control board, extended interface

board, and arrow light board.

Peripheral

You can view the status of the RS-485 card reader.

Temperature

DS-K3Y220(L)X Series Flap Barrier User Manual

You can view the pedestal temperature.

Movement

You can view the working status of motor encoder.

Sub Lane Status

Device Component

You can view the status of the access control board and arrow light board.

Peripheral

You can view the status of the RS-485 card reader.

Movement

You can view the working status of motor encoder.

Others

Passing Mode

You can view the entrance and exit mode.

IR Detector Status

You can view the status of each pair of the IR beam sensors.

Input and Output Status

You can view the status of the event input, alarm output and re alarm.

Other Status

You can view the status of the barrier and the keyfob receiving module.

7.5.16 Log Query

You can search and view the device logs.

Go to Maintenance and Security → Maintenance → Log .

Set the major and minor type of the log type. Set the start

me and end me for searching, and

click Search.

The results will be displayed below, which including the No.,

me, the major type the minor type,

the channel No., the local/remote user informaon, the remote host IP, etc.

7.5.17

Cercate Management

It helps to manage the server/client cercates and CA cercate.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

The funcon is only supported by certain device models.

Create and Install Self-signed Cercate

Steps

Go to Maintenance and Security → Security → Cercate Management .

In the Cercate Files area, select a Cercate Type from the drop-down list.

Click Create.

Input

cercate informaon.

Click OK to save and install the cercate.

The created cercate is displayed in the Cercate Details area.

The cercate will be saved automacally.

Download the cercate and save it to an asking le in the local computer.

Send the asking le to a cercaon authority for signature.

Import the signed cercate.

1) Select a cercate type in the Import Passwords area, and select a cercate from the local,

and click Install.

2) Select a

cercate type in the Import Communicaon Cercate area, and select a cercate

from the local, and click Install.

Install Other Authorized

Cercate

If you already has an authorized cercate (not created by the device), you can import it to the

device directly.

Steps

Go to Maintenance and Security → Security →

Cercate Management .

In the Import Passwords and Import Communicaon Cercate areas, select cercate type

and upload

cercate.

Click Install.

Install CA

Cercate

Before You Start

Prepare a CA cercate in advance.

Steps

Go to Maintenance and Security → Security →

Cercate Management .

Create an ID in the Import CA Cercate area.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

The input cercate ID cannot be the same as the exisng ones.

Upload a cercate le from the local.

Click Install.

DS-K3Y220(L)X Series Flap Barrier User Manual

Chapter 8 Client Soware Conguraon

8.1 Conguraon Flow of Client Soware

Follow the ow diagram below to congure on the client soware.

Figure 8-1 Flow Diagram of Conguraon on Client Soware

8.2 Device Management

The client supports managing access control devices and video intercom devices.

DS-K3Y220(L)X Series Flap Barrier User Manual

Example

You can control entrance & exit and manage aendance aer adding access control devices to the

client; you can perform video intercom with the indoor staons and door staons.

8.2.1 Add Device

The client provides three device adding modes including by IP/domain, IP segment, and ISUP

protocol. The client also supports imporng mulple devices in a batch when there are large

amount of devices to be added.

Add Device by IP Address or Domain Name

If you know the IP address or domain name of the device to add, you can add devices to the client

by specifying the IP address (or domain name), user name, password, etc.

Steps

Enter Device Management module.

Click Device tab on the top of the right panel.

The added devices are displayed on the right panel.

Click Add to open the Add window, and then select IP/Domain as the adding mode.

Enter the required

informaon.

Name

Create a descripve name for the device. For example, you can use a nickname that can show

the locaon or feature of the device.

Address

The IP address or domain name of the device.

Port

The devices to add share the same port number. The default value is 8000.

Note

For some device types, you can enter 80 as the port No. This funcon should be supported by

the device.

User Name

Enter the device user name. By default, the user name is admin.

Password

Enter the device password.

DS-K3Y220(L)X Series Flap Barrier User Manual

Cauon

The password strength of the device can be automacally checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers, lower case leers, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Oponal: Check Transmission Encrypon (TLS) to enable transmission encrypon using TLS

(Transport Layer Security) protocol for security purpose.

Note

●

This funcon should be supported by the device.

●

If you have enabled Cercate Vericaon, you should click Open Cercate Directory to

open the default folder, and copy the cercate le exported from the device to this default

directory to strengthen the security. See for details about enabling

cercate vericaon.

●

You can log into the device to get the

cercate le by web browser.

Check Synchronize Time to synchronize the device me with the PC running the client aer

adding the device to the client.

Oponal: Check Import to Group to create a group by the device name, and import all the

channels of the device to this group.

Example

For access control device, its access points, alarm inputs/outputs, and encoding channels (if

exist) will be imported to this group.

Finish adding the device.

Click Add to add the device and back to the device list page.

Click Add and New to save the sengs and connue to add other device.

Import Devices in a Batch

You can add mulple devices to the client in a batch by entering the device parameters in a pre-

dened CSV le.

Steps

Enter the Device Management module.

Click Device tab on the top of the right panel.

Click Add to open the Add window, and then select Batch Import as the adding mode.

Click Export Template and then save the

pre-dened template (CSV le) on your PC.

Open the exported template le and enter the required informaon of the devices to be added

on the corresponding column.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

For detailed descripon of the required elds, refer to the introducons in the template.

Adding Mode

Enter 0 or 1 or 2.

Address

Edit the address of the device.

Port

Enter the device port number. The default port number is 80.

User Name

Enter the device user name. By default, the user name is admin.

Password

Enter the device password.

Cauon

The password strength of the device can be automacally checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers, lower case leers, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Import to Group

Enter 1 to create a group by the device name. All the channels of the device will be imported

to the corresponding group by default. Enter 0 to disable this

funcon.

Click and select the template le.

Click Add to import the devices.

8.2.2 Reset Device Password

If you forgot the password of the detected online devices, you can reset the device password via

the client.

Steps

Enter Device Management page.

Click Online Device to show the online device area.

All the online devices sharing the same subnet will be displayed in the list.

Select the device from the list and click

on the Operaon column.

DS-K3Y220(L)X Series Flap Barrier User Manual

Reset the device password.

Click Generate to pop up the QR Code window and click Download to save the QR code to

your PC. You can also take a photo of the QR code to save it to your phone. Send the picture

to our technical support.

Note

For the following operaons for reseng the password, contact our technical support.

Cauon

The password strength of the device can be automacally checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case leers, lower case leers, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

8.2.3 Manage Added Devices

Aer adding devices to device list, you can manage the added devices including eding device

parameters, remote conguraon, viewing device status, etc.

Table 8-1 Manage Added Devices

Edit Device Click to edit device informaon including device name, address, user

name, password, etc.

Delete Device Check one or more devices, and click Delete to delete the selected

devices.

Remote Conguraon Click to set remote conguraon of the corresponding device. For

details, refer to the user manual of device.

View Device Status Click to view device status, including door No., door status, etc.

Note

For dierent devices, you will view dierent informaon about device

status.

View Online User Click to view the details of online user who access the device,

including user name, user type, IP address and login me.

Refresh Device

Informaon

Click to refresh and get the latest device informaon.

DS-K3Y220(L)X Series Flap Barrier User Manual

8.3 Group Management

The client provides groups to manage the added resources in dierent groups. You can group the

resources into dierent groups according to the resources' locaons.

Example

For example, on the 1st oor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You

can organize these resources into one group (named 1st Floor) for convenient management. You

can control door status, and do some other

operaons of the devices aer managing the resources

by groups.

8.3.1 Add Group

You can add group to organize the added device for convenient management.

Steps

Enter the Device Management module.

Click Device Management → Group to enter the group management page.

Create a group.

Click Add Group and enter a group name as you want.

Click Create Group by Device Name and select an added device to create a new group by the

name of the selected device.

Note

The resources (such as alarm inputs/outputs, access points, etc.) of this device will be

imported to the group by default.

8.3.2 Import Resources to Group

You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the

added group in a batch.

Before You Start

Add a group for managing devices. Refer to Add Group .

Steps

Enter the Device Management module.

Click Device Management → Group to enter the group management page.

Select a group from the group list and select the resource type as Access Point, Alarm Input,

Alarm Output, etc.

Click Import.

Select the thumbnails/names of the resources in the thumbnail/list view.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

You can click or to switch the resource display mode to thumbnail view or to list view.

Click Import to import the selected resources to the group.

8.4 Person Management

You can add person informaon to the system for further operaons such as access control, video

intercom,

me and aendance, etc. You can manage the added persons such as issuing cards to

them in a batch, imporng and exporng person informaon in a batch, etc.

8.4.1 Add

Organizaon

You can add an organizaon and import person informaon to the organizaon for eecve

management of the persons. You can also add a surbodinate organizaon for the added one.

Steps

Enter Person module.

Select a parent organizaon in the le column and click Add in the upper-le corner to add an

organizaon.

Create a name for the added organizaon.

Note

Up to 10 levels of organizaons can be added.

Oponal: Perform the following operaon(s).

Edit

Organizaon Hover the mouse on an added organizaon and click to edit its name.

Delete

Organizaon

Hover the mouse on an added organizaon and click to delete it.

Note

●

The lower-level organizaons will be deleted as well if you delete an

organizaon.

●

Make sure there is no person added under the organizaon, or the

organizaon cannot be deleted.

Show Persons in

Sub Organizaon

Check Show Persons in Sub Organizaon and select an organizaon to

show persons in its sub organizaons.

8.4.2 Import and Export Person Idenfy Informaon

You can import the informaon and pictures of mulple persons to the client soware in a batch.

Meanwhile, you can also export the person

informaon and pictures and save them in your PC.

DS-K3Y220(L)X Series Flap Barrier User Manual

Import Person Informaon

You can enter the informaon of mulple persons in a predened template (CSV/Excel le) to

import the

informaon to the client in a batch.

Steps

Enter the Person module.

Select an added organizaon in the list, or click Add in the upper-le corner to add an

organizaon and then select it.

Click Import to open the Import panel.

Select Person Informaon as the imporng mode.

Click Download Template for

Imporng Person to download the template.

Enter the person informaon in the downloaded template.

Note

●

If the person has mulple cards, separate the card No. with semicolon.

●

Items with asterisk are required.

●

By default, the Hire Date is the current date.

Click to select the CSV/Excel le with person informaon from local PC.

Click Import to start imporng.

Note

●

If a person No. already exists in the client's database, delete the exisng informaon before

imporng.

●

You can import informaon of no more than 2,000 persons.

Import Person Pictures

Aer imporng face pictures for the added persons to the client, the persons in the pictures can be

idened by an added face recognion terminal. You can either import person pictures one by

one, or import

mulple pictures at a me according to your need.

Before You Start

Be sure to have imported person informaon to the client beforehand.

Steps

Enter the Person module.

Select an added organizaon in the list, or click Add in the upper-le corner to add an

organizaon and then select it.

Click Import to open the Import panel and check Face.

Oponal: Enable Verify by Device to check whether face recognion device managed in the

client can recognize the face in the photo.

Click

to select a face picture le.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

●

The (folder of) face pictures should be in ZIP format.

●

Each picture le should be in JPG format and should be no larger than 200 KB.

●

Each picture le should be named as "Person ID_Name". The Person ID should be the same

with that of the imported person

informaon.

Click Import to start imporng.

The imporng progress and result will be displayed.

Export Person Informaon

You can export the added persons' informaon to local PC as a CSV/Excel le.

Before You Start

Make sure you have added persons to an organizaon.

Steps

Enter the Person module.

Oponal: Select an organizaon in the list.

Note

All persons' informaon will be exported if you do not select any organizaon.

Click Export to open the Export panel.

Check Person Informaon as the content to export.

Check desired items to export.

Click Export to save the exported

le in CSV/Excel le on your PC.

Export Person Pictures

You can export face picture le of the added persons and save in your PC.

Before You Start

●

Make sure you have added persons and their face pictures to an organizaon.

●

Make sure you have enabled the Export Person Informaon funcon to display the Export

buon. See for details.

Steps

Enter the Person module.

Oponal: Select an organizaon in the list.

Note

All persons' face pictures will be exported if you do not select any organizaon.

Click Export on the top menu bar.

DS-K3Y220(L)X Series Flap Barrier User Manual

Enter the super user name and password for vericaon.

The Export panel is displayed.

Check Face as the content to export.

Click Export and set an

encrypon key to encrypt the exported le.

Note

●

The exported le is in ZIP format.

●

The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).

8.4.3 Get Person Informaon from Access Control Device

If the access control device has been congured with person informaon (including person details,

ngerprint, and issued card informaon), you can get the person informaon from the added

device and import them to the client for further

operaons.

Steps

Note

●

If the person name stored in the device is empty, the person name will be lled with the issued

card No. aer imporng to the client.

●

Persons will be Male by default.

●

If the card number or person ID (employee ID) stored on the device already exists in the client

database, the person with this card number or person ID will not be imported to the client.

Enter Person module.

Select an

organizaon to import the persons.

Click Get from Device.

Select an added access control device or the enrollment

staon from the drop-down list.

Note

If you select the enrollment staon, you should click Login, and enter IP address, port No., user

name and password of the device.

Select the Geng Mode.

Note

The geng mode varies according to dierent devices. The access control device supports

geng the person informaon by employee ID. Up to 5 employee IDs can be specied each

me.

Click Import to start imporng the person informaon to the client.

Note

Up to 2,000 persons and 5,000 cards can be imported.

DS-K3Y220(L)X Series Flap Barrier User Manual

The person informaon, including person details, person's ngerprint informaon (if

congured), and the linked cards (if congured), will be imported to the selected organizaon.

8.4.4 Issue Cards to Persons in Batch

The client provides a convenient way to issue cards to mulple persons in a batch.

Steps

Enter Person module.

Click Batch Issue Cards.

All the added persons with no card issued will be displayed in the right panel.

Oponal: Enter key words (name or person ID) in the input box to lter the person(s) that need

issuing cards.

Oponal: Click Sengs to set the card issuing parameters. For details, refer to Issue a Card by

Local Mode.

Click

Inialize to inialize the card enrollment staon or card reader to make it ready for issuing

cards.

Click the Card No. column and enter the card number.

Place the card on the card enrollment staon.

Swipe the card on the card reader.

Manually enter the card number and press the Enter key.

The person(s) in the list will be issued with card(s).

8.4.5 Report Card Loss

If the person lost his/her card, you can report the card loss so that the card's related access

authorizaon will be inacve.

Steps

Enter Person module.

Select the person you want to report card loss for and click Edit to open the Edit Person window.

In the

Credenal → Card panel, click on the added card to set this card as lost card.

Aer reporng card loss, the access authorizaon of this card will be invalid and inacve. Other

person who gets this card cannot access the doors by swiping this lost card.

Oponal: If the lost card is found, you can click to cancel the loss.

Aer cancelling card loss, the access authorizaon of the person will be valid and acve.

If the lost card is added in one access group and the access group is applied to the device

already, aer reporng card loss or cancelling card loss, a window will pop up to nofy you to

apply the changes to the device.

Aer applying to device, these changes can take eect on the

device.

DS-K3Y220(L)X Series Flap Barrier User Manual

8.4.6 Set Card Issuing Parameters

The client provides two modes for reading a card's number: via card enrollment staon or via the

card reader of the access control device. If a card enrollment

staon is available, connect it to the

PC running the client by USB interface or COM, and place the card on the card enrollment to read

the card number. If not, you can also swipe the card on the card reader of the added access control

device to get the card number. As a result, before issuing a card to one person, you need to set the

card issuing parameters including the issuing mode and related parameters.

When adding a card to one person, click

Sengs to open the Card Issuing Sengs window.

Local Mode: Issue Card by Card Enrollment Staon

Connect a card enrollment staon to the PC running the client. You can place the card on the card

enrollment

staon to get the card number.

Card Enrollment Staon

Select the model of the connected card enrollment staon

Note

Currently, the supported card enrollment staon models include DS-K1F100-D8, DS-K1F100-M,

DS-K1F100-D8E, and DS-K1F180-D8E.

Card Type

This eld is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E.

Select the card type as EM card or IC card according to the actual card type.

Serial Port

It is only available when the model is DS-K1F100-M.

Select the COM the card enrollment

staon connects to.

Buzzing

Enable or disable the buzzing when the card number is read successfully.

Card No. Type

Select the type of the card number according to actual needs.

M1 Card Encrypon

This eld is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E.

If the card is M1 card, and if you need to enable the M1 Card Encrypon funcon, you should

enable this funcon and select the sector of the card to encrypt.

Remote Mode: Issue Card by Card Reader

Select an access control device added in the client and swipe the card on its card reader to read

the card number.

DS-K3Y220(L)X Series Flap Barrier User Manual

8.5 Congure Schedule and Template

You can congure the template including holiday and week schedule. Aer seng the template,

you can adopt the congured template to access groups when seng the access groups, so that

the access group will take eect in the me duraons of the template.

Note

For access group sengs, refer to Set Access Group to Assign Access Authorizaon to Persons .

8.5.1 Add Holiday

You can create holidays and set the days in the holidays, including start date, end date, and holiday

duraon in one day.

Steps

Note

You can add up to 64 holidays in the soware system.

Click Access Control → Schedule → Holiday to enter the Holiday page.

Click Add on the le panel.

Create a name for the holiday.

Oponal: Enter the descripons or some nocaons of this holiday in the Remark box.

Add a holiday period to the holiday list and congure the holiday duraon.

Note

Up to 16 holiday periods can be added to one holiday.

1) Click Add in the Holiday List eld.

2) Drag the cursor to draw the me duraon, which means in that duraon of me, the

congured access group is acvated.

Note

Up to 8 me duraons can be set to one holiday period.

3) Oponal: Perform the following operaons to edit the me duraons.

●

Move the cursor to the me duraon and drag the me duraon on the meline bar to the

desired

posion when the cursor turns to .

●

Click the me duraon and directly edit the start/end me in the appeared dialog.

●

Move the cursor to the start or the end of

me duraon and drag to lengthen or shorten

the me duraon when the cursor turns to .

4) Oponal: Select the me duraon(s) that need to be deleted, and then click in the

Operaon column to delete the selected me duraon(s).

5) Oponal: Click in the Operaon column to clear all the me duraon(s) in the me bar.

DS-K3Y220(L)X Series Flap Barrier User Manual

6) Oponal: Click in the Operaon column to delete this added holiday period from the

holiday list.

Click Save.

8.5.2 Add Template

Template includes week schedule and holiday. You can set week schedule and assign the me

duraon of access authorizaon for dierent person or group. You can also select the added

holiday(s) for the template.

Steps

Note

You can add up to 255 templates in the soware system.

Click Access Control → Schedule → Template to enter the Template page.

Note

There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be

edited or deleted.

All-Day Authorized

The access authorizaon is valid in each day of the week and it has no holiday.

All-Day Denied

The access authorizaon is invalid in each day of the week and it has no holiday.

Click Add on the le panel to create a new template.

Create a name for the template.

Enter the

descripons or some nocaon of this template in the Remark box.

Edit the week schedule to apply it to the template.

1) Click Week Schedule tab on the lower panel.

2) Select a day of the week and draw

me duraon(s) on the meline bar.

Note

Up to 8 me duraon(s) can be set for each day in the week schedule.

3) Oponal: Perform the following operaons to edit the me duraons.

●

Move the cursor to the

me duraon and drag the me duraon on the meline bar to the

desired posion when the cursor turns to .

●

Click the me duraon and directly edit the start/end me in the appeared dialog.

●

Move the cursor to the start or the end of

me duraon and drag to lengthen or shorten

the me duraon when the cursor turns to .

4) Repeat the two steps above to draw more

me duraons on the other days of the week.

Add a holiday to apply it to the template.

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

Up to 4 holidays can be added to one template.

1) Click Holiday tab.

2) Select a holiday in the le list and it will be added to the selected list on the right panel.

3) Oponal: Click Add to add a new holiday.

Note

For details about adding a holiday, refer to Add Holiday .

4) Oponal: Select a selected holiday in the right list and click to remove the selected one, or

click Clear to clear all the selected holiday(s) in the right list.

Click Save to save the

sengs and nish adding the template.

8.6 Set Access Group to Assign Access

Authorizaon to Persons

Aer adding the person and conguring the person's credenals, you can create the access groups

to dene which person(s) can get access to which door(s) and then apply the access group to the

access control device to take

eect.

Before You Start

●

Add person to the client.

●

Add access control device to the client and group access points. For details, refer to Group

Management .

●

Add template.

Steps

When the access group sengs are changed, you need to apply the access groups to the devices

again to take

eect. The access group changes include changes of template, access group sengs,

person's access group sengs, and related person details (including card number, ngerprint, face

picture, linkage between card number and

ngerprint, linkage between card number and

ngerprint, card password, card eecve period, etc).

Click Access Control →

Authorizaon → Access Group to enter the Access Group interface.

Click Add to open the Add window.

In the Name text

eld, create a name for the access group as you want.

Select a template for the access group.

Note

You should congure the template before access group sengs. Refer to Congure Schedule

and Template for details.

In the le list of the Select Person eld, select person(s) to assign access authority.

In the

le list of the Select Access Point eld, select door(s), door staon(s) or oor(s) for the

selected persons to access.

DS-K3Y220(L)X Series Flap Barrier User Manual

Click Save.

You can view the selected person(s) and the selected access point(s) on the right side of the

interface.

Figure 8-2 Display the Selected Person(s) and Access Point(s)

Aer adding the access groups, you need to apply them to the access control device to take

eect.

1) Select the access group(s) to apply to the access control device.

2) Click Apply All to Devices start applying all the selected access group(s) to the access control

device or door

staon.

3) Click Apply All to Devices or Apply Changes to Devices.

Apply All to Devices

This

operaon will clear all the existed access groups of the selected devices and then

apply the new access group to the device.

Apply Changes to Devices

This operaon will not clear the existed access groups of the selected devices and only

apply the changed part of the selected access group(s) to the device(s).

4) View the applying status in the Status column or click Applying Status to view all the applied

access group(s).

Note

You can check Display Failure Only to lter the applying results.

DS-K3Y220(L)X Series Flap Barrier User Manual

The selected persons in the applied access groups will have the authorizaon to enter/exit the

selected doors/door staons with their linked card(s) or ngerprints.

Oponal: Click to edit the access group if necessary.

Note

If you change the persons' access informaon or other related informaon, you will view the

prompt Access Group to Be Applied on the right corner of the client.

You can click the prompt to apply the changed data to the device. You can select either Apply

Now or Apply Later.

Figure 8-3 Data Synchronizaon

8.7

Congure Advanced Funcons

You can congure the advanced funcons of access control to meet some special requirements in

dierent scene.

Note

●

For the card related funcons(the type of access control card), only the card(s) with access group

applied will be listed when adding cards.

●

The advanced funcons should be supported by the device.

●

Hover the cursor on the Advanced

Funcon, and then Click to customize the advanced

funcon(s) to be displayed.

8.7.1 Congure Device Parameters

Aer adding the access control device, you can congure the parameters of access control device,

access control points.

DS-K3Y220(L)X Series Flap Barrier User Manual

Congure Parameters for Access Control Device

Aer adding the access control device, you can congure its parameters, including overlaying user

informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.

Before You Start

Add access control device to the client.

Steps

Click Access Control → Advanced Funcon → Device Parameters .

Note

If you can not nd Device Parameter in the Advanced Funcon list, hover the cursor on the

Advanced Funcon, and then Click to select the Device Parameter to be displayed.

Select an access device to show its parameters on the right page.

Turn the switch to ON to enable the corresponding

funcons.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Enable NFC

If enable the funcon, the device can recognize the NFC card. You can present NFC card on

the device.

Enable M1 Card

If enable the funcon, the device can recognize the M1 card. You can present M1 card on the

device.

Enable EM Card

If enable the

funcon, the device can recognize the EM card. You can present EM card on the

device.

Enable CPU Card

Reserved. If enable the funcon, the device can recognize the CPU card. You can present CPU

card on the device.

Enable ID Card

Reserved. If enable the

funcon, the device can recognize the ID card. You can present ID

card on the device.

Click OK.

Oponal: Click Copy to, and then select the access control device(s) to copy the parameters in

the page to the selected device(s).

DS-K3Y220(L)X Series Flap Barrier User Manual

Congure Parameters for Door

Aer adding the access control device, you can congure its access point door parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Select an access control device on the

le panel, and then click to show the doors or oors of

the selected device.

Select a door or

oor to show its parameters on the right page.

Edit the door or oor parameters.

Note

The displayed parameters may vary for dierent access control devices.

Name

Edit the card reader name as desired.

Exit Buon Type

You can set the exit buon as remaining closed or remaining open. Usually, it is remaining

open.

Open Duraon

Aer swiping the normal card and relay acon, the me for locking the door starts working.

Door Le Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a congured me period. If it is

set as 0, no alarm will be triggered.

Super Password

The

specic person can open the door by inpung the super password.

Some of the following parameters are not listed in the Basic Informaon page, click Advanced to

edit the parameters.

Duress Code

The door can open by

inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

DS-K3Y220(L)X Series Flap Barrier User Manual

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door(s) to copy the parameters in the page to the

selected doors(s).

Note

The door's status duraon sengs will be copied to the selected door(s) as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

In the device list on the le, click to expand the door, select a card reader and you can edit the

card reader's parameters on the right.

Edit the card reader basic parameters in the Basic

Informaon page.

Note

The displayed parameters may vary for dierent access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

Name

Edit the card reader name as desired.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Alarm of Max. Failed

Aempts

Enable to report alarm when the card reading aempts reach the set value.

Card Reader Type/Card Reader Descripon

Get card reader type and descripon. They are read-only.

Oponal: Some of the following parameters are not listed in the Basic Informaon page, click

Advanced to edit the parameters.

Enable Card Reader

DS-K3Y220(L)X Series Flap Barrier User Manual

If enabling the funcon, user can present card on the card reader. If disabling the funcon,

the card reader for entrance cannot be used.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default sengs.

Buzzing Time

Set the card reader buzzing me. The available me ranges from 0 to 5,999s. 0 represents

connuous buzzing.

Max. Interval When Entering PWD

When you inpung the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automacally.

Tampering Detecon

Enable the an-tamper detecon for the card reader.

Communicate with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Fingerprint Recognion Level

Select the ngerprint recognion level in the drop-down list.

Click OK.

Oponal: Click Copy to, and then select the card reader(s) to copy the parameters in the page to

the selected card reader(s).

Congure

Parameters for Alarm Output

Aer adding the access control device, if the device links to alarm outputs, you can congure the

parameters.

Before You Start

Add access control device to the client, and make sure the device supports alarm output.

Steps

Click Access Control → Advanced

Funcon → Device Parameter to enter access control

parameter conguraon page.

In the device list on the

le, click to expand the door, select an alarm input and you can edit

the alarm input's parameters on the right.

Set the alarm output parameters.

Name

Edit the card reader name as desired.

Alarm Output

Acve Time

How long the alarm output will last aer triggered.

DS-K3Y220(L)X Series Flap Barrier User Manual

Click OK.

Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.

Congure Parameters for Lane Controller

Aer adding the lane controller to the client, you can congure its parameters for passing through

the lane.

Steps

Click Access Control → Advanced

Funcon → Device Parameter to enter Parameter Sengs

page.

In the device list on the le, select a lane controller and you can edit the lane controller's

parameters on the right.

Edit the parameters.

Passing Mode

Select the controller which will control the barrier status of the device.

●

If you select According to DIP

Sengs, the device will follow the lane controller's DIP

sengs to control the barrier. The sengs on the soware will be invalid.

●

If you select According to Door's Schedule

Sengs, the device will follow the sengs of

the soware to control the barrier. The DIP sengs of the lane controller will be invalid.

Enable Free Passing Authencaon

If you enable this funcon, when both entrance and exit's barrier mode is Remain Open, the

pedestrians should

authencate each me passing through the lane. Or an alarm will be

triggered.

Alarm Voice Prompt Time Duraon

Set how long the audio will last, which is played when an alarm is triggered .

Note

0 refers to the alarm audio will be played unl the alarm is ended.

Temperature Unit

Select the temperature unit that displayed in the device status.

Motor Rotaon Direcon

Set the motor rotaon as Clockwise or Anclockwise. The motor rotaon direcon is the

barrier's open direcon.

Note

●

For single pedestal scenario, the motor rotaon direcon should set as Clockwise.

●

For mulple pedestals scenario, standing at the entrance, the motor rotaon direcon

from right to le should set as: Clockwise, Anclockwise, Clockwise, etc. respecvely.

DS-K3Y220(L)X Series Flap Barrier User Manual

Lightboard Brightness

Set the lightboard brightness.

Barrier Material

Select the material of the barrier gate. You can select the barrier material from the drop-

down list.

Note

The barrier material may aect the device working. Select a correct barrier material or the

barrier may not open.

Lane Length

The width of the lane. You can set the lane width.

Note

The lane width may aect the device working. Set a correct lane width or the barrier may not

open.

Do Not Open Barrier in Authencates in Lane

If there is someone or something in the lane, the gate will not open even if the credenal is

authencated.

This funcon is designed to avoid more than one person passing through the gate with only

one authencaon.

Opening/Closing Barrier Speed

Set the barrier's opening and closing speed. You can select from 1 to 10. The greater the

value, the faster the speed.

Note

The recommended value is 6.

Click OK.

8.7.2

Congure Device Parameters

Aer adding the access control device, you can set its parameters such as network parameters.

Set RS-485 Parameters

You can set the access control device's RS-485 parameters including the baud rate, data bit, the

stop bit, parity type,

ow control type, communicaon mode, work mode, and connecon mode.

DS-K3Y220(L)X Series Flap Barrier User Manual

Steps

Note

The RS-485 Sengs should be supported by the device.

Enter the Access Control module.

On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click RS-485 to enter the RS-485

Sengs

page.

Select the serial port number from the drop-down list to set the RS-485 parameters.

Set the serial number, external device, authencaon center, baud rate, data bit, stop bit, parity

type,

ow control type, communicaon mode, and working mode in the drop-down list.

Click Save.

●

The congured parameters will be applied to the device automacally.

●

When you change the working mode or connecon mode, the device will reboot

automacally.

Enable M1 Card

Encrypon

M1 card encrypon can improve the security level of authencaon.

Steps

Note

The funcon should be supported by the access control device and the card reader.

Enter the Access Control module.

On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click M1 Card

Encrypon Vericaon to

enter the M1 Card Encrypon Vericaon page.

Set the switch to on to enable the M1 card

encrypon funcon.

Set the sector ID.

Note

●

The sector ID ranges from 1 to 100.

●

By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.

Click Save to save the sengs.

8.8 Door Control

In Monitoring module, you can view the real-me status of the doors managed by the added

access control device. You can also control the doors such as open/close the door, or remain the

DS-K3Y220(L)X Series Flap Barrier User Manual

door open/closed via the client remotely. The real-me access event are displayed in this module.

You can view the access details and person details.

Note

For the user with door control permission, the user can enter the Monitoring module and control

the door. Or the icons used for control will not show. For seng the user permission, refer to

Person Management .

8.8.1 Control Door Status

You can control the status for the door(s), including unlock door, locking door, remaining the door

unlock, remaining the door locked, remain all unlocked, etc.

Before You Start

●

Add person and assign access

authorizaon to designed person, and person will have the access

authorizaon to the access points (doors). For details, refer to Person Management and Set

Access Group to Assign Access Authorizaon to Persons .

●

Make sure the

operaon user has the permission of the access points (doors).

Steps

Click Monitoring to enter the status monitoring page.

Select an access point group on the upper-right corner.

Note

For managing the access point group, refer to Group Management .

The doors in the selected access control group will display.

Click a door icon to select a door, or press Ctrl and select

mulple doors.

Note

For Remain All Unlocked and Remain All Locked, ignore this step.

Click the following buons to control the door.

Unlock

When the door is locked, unlock it and it will be open for once.

Aer the open duraon, the

door will be closed and locked again automacally.

Lock

When the door is unlocked, lock it and it will be closed. The person who has the access

authorizaon can access the door with credenals.

Remain Unlocked

The door will be unlocked (no maer closed or open). All the persons can access the door

with no

credenals required.

Remain Locked

DS-K3Y220(L)X Series Flap Barrier User Manual

The door will be closed and locked. No person can access the door even if he/she has the

authorized credenals, except the super users.

Remain All Unlocked

All doors in the group will be unlocked (no maer closed or open). All the persons can access

the doors with no credenals required.

Remain All Locked

All doors in the group will be closed and locked. No person can access the doors even if

he/she has the authorized

credenals, except the super users.

Capture

Capture a picture manually.

Note

The Capture buon is available when the device supports capture funcon. The picture is

saved in the PC running the client. For seng the saving path, refer to Set File Saving Path in

the user manual of the client soware.

Result

The icon of the doors will change in real-me according to the operaon if the operaon is

succeeded.

8.8.2 Check Real-Time Access Records

The real-me access records can be displayed in the client, including card swiping records, face

recognion records, skin-surface temperature informaon, etc. Also, you can view the person

informaon and view the picture captured during access.

Before You Start

You have added person(s) and access control device(s) to the client. For details, refer to Person

Management and Add Device .

Steps

Click Monitoring to enter monitoring module.

Real-me access records are displayed on the boom of the page. You can view record details,

including card No., person name, event

me, door locaon, temperature, authencaon type

etc.

DS-K3Y220(L)X Series Flap Barrier User Manual

Figure 8-4 Real-me Access Records

Note

You can right click the column name of access event table to show or hide the column according

to actual needs.

Oponal: Select an access point group from the drop-down list in the upper-right corner to

show the real me access records of the selected group.

Oponal: Check the event type and event status.

The detected events of checked type and status will be displayed in the list below.

Oponal: Check Show Latest Event to view the latest access record.

The record list will be listed reverse chronologically.

Oponal: Check Enable Abnormal Temperature Prompt to enable abnormal skin-surface

temperature prompt.

Note

When enabled, if there is abnormal temperature informaon, an Abnormal Temperature

window pops up when you enter Monitoring module, displaying person's picture, skin-surface

temperature, card No., person name, etc.

Oponal: Click an event to view person pictures (including captured picture and prole).

Note

In Linked Capture Picture eld, you can double click the captured picture to view an enlarged

picture.

Oponal: Click to view details (including person's detailed informaon and the captured

picture).

Note

In the pop-up window, you can click to view details in full screen.

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix A. DIP Switch

A.1 DIP Switch Descripon

The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit.

Figure A-1 DIP Switch

When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o.

A.2 DIP Switch Corresponded

Funcons

Note

Aer seng the DIP switch, you should reboot the device, or the funcon cannot take eect.

The 2-bit DIP switch corresponded funcons on the access control board are as follows:

Bit

Device Mode Funcon Decimal Value DIP Switch

Address Diagram

1 Work Mode Normal Mode 0

Study Mode 1

2 Keyfob Paring

Mode

Disable Keyfob

Paring Mode

Enable Keyfob

Paring Mode

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix B. Buon Conguraon Descripon

Refer to the table below for device conguraon via buon on the main lane control board.

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

2 keyfob Pairing Mode 1-Normal Mode

2-Pairing Mode

Note

By default, 1 will be

displayed on the

display screen.

3 Passing Mode 1-Both sides under

control

Note

By default, 1 will be

displayed on the

display screen.

2-Entrance under

control; exit prohibited

3-Entrance under

control; exit on

inducve mode

4-Both sides on

inducve mode

5-Entrance on

inducve mode; exit

under control

6-Entrance on

inducve mode; exit

prohibited

7-Both sides prohibited

8-Entrance prohibited;

exit under control

9-Entrance prohibited;

exit on

inducve mode

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

10-Entrance under

control; exit remaining

open

11-Entrance under

control; exit on free

mode

12-Entrance on

inducve mode; exit

remaining open

13-Entrance on

inducve mode; exit

on free mode

14-Entrance

prohibited; exit

remaining open

15-Entrance

prohibited; exit on free

mode

16-Entrance remaining

open; exit under

control

17-Entrance remaining

open; exit on

inducve

mode

18-Entrance remaining

open; exit remaining

open

19-Entrance remaining

open; exit on free

mode

20-Entrance remaining

open; exit prohibited

21-Entrance on free

mode; exit under

control

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

22-Entrance on free

mode; exit on

inducve mode

23-Entrance on free

mode; exit remaining

open

24-Entrance on free

mode; exit on free

mode

25-Entrance on free

mode; exit prohibited

4 Memory Mode 1-Disable

2-Enable

Note

By default, 2 will be

displayed on the

display screen.

5 keyfob Remote Control 1-one to one

2-one to mulple

Note

By default, 1 will be

displayed on the

display screen.

6 Barrier Opening Speed 1-1, 2-2, …10-10

Note

By default, 5 will be

displayed on the

display screen.

7 Barrier Closing Speed 1-1, 2-2, …10-10

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 5 will be

displayed on the

display screen.

8 Card Reading on the

Alarm Area

1-Do not open

2-Open

Note

By default, 2 will be

displayed on the

display screen.

9 Enter Duraon 5-5s，6-6s，7-7s, ..., 60-

60s

Note

By default, 5 will be

displayed on the

display screen.

10 Exit Duraon 5-5s，6-6s，7-7s, ..., 60-

60s

Note

By default, 5 will be

displayed on the

display screen.

11 IR Sensing Duraon 0-0s，1-1s，2-2s,..., 25-

25s

Note

By default, 0 will be

displayed on the

display screen.

12 Intrusion Duraon 0-0s，1-1s，2-2s,..., 20-

20s

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 0 will be

displayed on the

display screen.

13 Overstay Duraon 0-0s，1-1s，2-2s,..., 20-

20s

Note

By default, 0 will be

displayed on the

display screen.

14 Delay Time for Barrier

Closing

0-0s，1-1s，2-2s，3-

3s，4-4s，5-5s

Note

By default, 0 will be

displayed on the

display screen.

15 Control Mode 1-Buon Conguraon

2-DIP Switch on Access

Control Board

Note

By default, 1 will be

displayed on the

display screen.

17 IR Conguraon for

Closing in Advance

1-1，2-2, …, N-N

Note

By default, 1 will be

displayed on the

display screen.

18 Lane Number 1-Dual Lanes

2-Single Lane

Unable to change

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 1 will be

displayed on the

display screen.

19 Motor Rotaon 1-Clockwise

2-Anclockwise

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

21 Volume 1-0，2-1，3-2，4-3，

5-4

Note

By default, 2 will be

displayed on the

display screen.

The device will be

muted when set to "1".

22 Authencated Passing 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

23 Invalid Card No. 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

24 Fingerprint Unmatched 1-Disable

2-Enable

Unable to change

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 1 will be

displayed on the

display screen.

25 Climbing over Barrier 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

26 Reverse Passing 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

27 Exceeding Passing

Duraon

1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

28 Intrusion Alarm 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

29 Forced Passing 1-Disable

2-Enable

Unable to change

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 1 will be

displayed on the

display screen.

30 Tailgang Alarm 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

31 Unauthorized Passing 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

32 Exceeding

Authencaon

Duraon

1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

33 Failed Authencaon 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

Unable to change

34 Expired Credenal 1-Disable

2-Enable

Unable to change

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

Note

By default, 1 will be

displayed on the

display screen.

35 Overstaying Alarm 1-Disable

2-Enable

Note

By default, 1 will be

displayed on the

display screen.

36 Barrier Material 1-Acrylic

37 Barrier Length 1-550

2-600

Note

By default, 2 will be

displayed on the

display screen.

38 Motor Inspecon 1-Disable

2-Enable on Main Lane

3-Enable on Sub Lane

Note

By default, 1 will be

displayed on the

display screen.

39 Brightness of Light 0-0，1-1，2-2, … , 10-

Note

By default, 3 will be

displayed on the

display screen.

The higher the value is,

the brighter the light

will be.

DS-K3Y220(L)X Series Flap Barrier User Manual

Level-1 Conguraon

No.

Descripon Level-1 Conguraon

No. and Funcons

Notes

40 Self-check Voice

Prompt

1-Disable

2-Enable

Note

By default, 2 will be

displayed on the

display screen.

Control the device to

play the voice prompt

of self-check or not.

41 Study Mode Voice

Prompt

1-Disable

2-Enable

Note

By default, 2 will be

displayed on the

display screen.

Control the device to

play the voice prompt

of study mode or not.

42 IR Detector Quanty 4-4，6-6，8-8,

Note

By default, 4 will be

displayed on the

display screen.

Unable to change

99 Restore to Default 1- Default

2- Start

Note

By default, 1 will be

displayed on the

display screen.

The device will reboot.

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix C. Event and Alarm Type

Event Alarm Type

Tailgang Visual and Audible

Reverse Passing Visual and Audible

Force Accessing None

Climb over Barrier Visual and Audible

Overstay Visual and Audible

Passing Timeout None

Intrusion Visual and Audible

Free Passing

Authencaon Failed

Visual and Audible

Barrier Obstructed None

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix D. Table of Audio Index Related Content

Index Content

1 Climbing over the barrier.

2 Reverse passing.

3 Passing meout.

4 Intrusion.

5 Tailgang.

6 Overstay.

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix E. Error Code Descripon

The swing barrier will display the error code on the seven-segment display if error occurred. Refer

to the table below to

nd the descripon of each number.

Error Reason Code Error Reason Code

The First IR Beam Triggered 01 Not Studying 54

The Second IR Beam Triggered 02 Obstrucon 55

The Third IR Beam Triggered 03 Exceeding Studying Range 56

The Fourth IR Beam Triggered 04 Encoder Excepon 57

Voice Board Oine

Note

If the voice board is not

installed, the error code of 49

will be displayed but the

device

funcons normally.

Oponal Board Not Installed

Note

If the oponal board is not

installed, the error code of 49

will be displayed but the

device

funcons normally.

49 Motor Excepon 58

Interconnecng Excepon 53

DS-K3Y220(L)X Series Flap Barrier User Manual

Appendix F. Communicaon Matrix and Device

Command

Communicaon Matrix

Scan the following QR code to get the device communicaon matrix.

Note that the matrix contains all

communicaon ports of Hikvision access control and video

intercom devices.

Figure F-1 QR Code of Communicaon Matrix

Device Command

Scan the following QR code to get the device common serial port commands.

Note that the command list contains all commonly used serial ports commands for all Hikvision

access control and video intercom devices.

Figure F-2 Device Command

DS-K3Y220(L)X Series Flap Barrier User Manual

100

UD30564B-A

Hikvision DS-K3Y220LX Value Flap Barriers

Product's Documents

User Manual

Specifications

Hikvision DS-K3Y220LX Questions and Answers