Hikvision DS-K3Y220LX User Manual

Loading ...

If enabling the funcon, user can present card on the card reader. If disabling the funcon,

the card reader for entrance cannot be used.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default sengs.

Buzzing Time

Set the card reader buzzing me. The available me ranges from 0 to 5,999s. 0 represents

connuous buzzing.

Max. Interval When Entering PWD

When you inpung the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automacally.

Tampering Detecon

Enable the an-tamper detecon for the card reader.

Communicate with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Fingerprint Recognion Level

Select the ngerprint recognion level in the drop-down list.

Click OK.

Oponal: Click Copy to, and then select the card reader(s) to copy the parameters in the page to

the selected card reader(s).

Congure

Parameters for Alarm Output

Aer adding the access control device, if the device links to alarm outputs, you can congure the

parameters.

Before You Start

Add access control device to the client, and make sure the device supports alarm output.

Steps

Click Access Control → Advanced

Funcon → Device Parameter to enter access control

parameter conguraon page.

In the device list on the

le, click to expand the door, select an alarm input and you can edit

the alarm input's parameters on the right.

Set the alarm output parameters.

Name

Edit the card reader name as desired.

Alarm Output

Acve Time

How long the alarm output will last aer triggered.

DS-K3Y220(L)X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y220LX Value Flap Barriers