Loading ...
Loading ...
Loading ...
8.
Choose the control mode.
So Mode
The barrier will be closed aer the person has passed through the barrier when there are
tailing, forced accessing, etc.
Guard Mode
The barrier will be closed immediately when there are tailgang, forced accessing, etc.
9.
Set the
re input type.
10.
Click to enable Motor Self-Test and choose the main lane or sub lane to start motor self-
tesng.
11.
Click Save.
7.5.11 Card
Sengs
Set Card Security
Click Conguraon → Card Sengs → Card Type to enter the sengs page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from
geng the data of the access control, you can
enable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card and
authencang by presenng M1 card is available.
M1 Card Encrypon
Sector
M1 card encrypon can improve the security level of authencaon.
Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authencang by presenng EM card is available.
Note
If the peripheral card reader supports presenng EM card, the funcon is also supported to
enable/disable the EM card funcon.
Enable CPU Card
Enable CPU card and authencang by presenng CPU card is available.
CPU Card Read Content
Aer enable the CPU card content reading funcon, the device can read the CPU card content.
DS-K3Y220(L)X Series Flap Barrier User Manual
53
Loading ...
Loading ...
Loading ...