Loading ...
Loading ...
Loading ...
7
INSTALLATION
Single Oven Assembly to Stand
Your combi oven has been shipped with black plastic
caps on the corners of its base. In order to mount your
oven to its stand, please do the following:
1. Remove the stand from the packaging. Install the
casters or feet into the base of the stand. If inserting
casters ensure that the locking casters are at the front
of the stand, see gure. Place the stand upright in an
area readily available.
2. Remove all packaging from the oven, so that the oven
can be picked up.
3. Remove the black plastic caps on each corner by
removing the two screws holding them on. Do NOT
discard these screws; they will be used to mount the
oven to the stand.
4. Position the oven over the stand and align the corner
brackets on the stand with the holes on the oven.
5. Use the screws from the plastics caps to mount the
oven to the stand.
6. The oven has now been properly fastened to the
stand.
Note dierence in rail
placement
Front of stand
Figure 2
Loading ...
Loading ...
Loading ...