Loading ...
Loading ...
Loading ...
11
INSTALLATION
Stacking - 61, 62, 101, 102
Unless indicated, the following steps apply to all 61,
62, 101 and 102 combi ovens
9. Lift the top oven o the pallet. Place corrugated card-
board blocks over forks of the lifting mechanism.
DO NOT LIFT FROM BOTTOM OF THE OVEN! Be
aware that the oven is heavier on the control side and
may tip in that direction. Adjust lift arm position ac-
cordingly.
10. While the oven is lifted, remove the four (4) black feet
from bottom of oven. Save four (4) of the mounting
bolts from the feet. These will be used to tie the ovens
together once stacked.
11. Install the cleaning system hoses as follows:
Installation of the red and blue hoses CANNOT hap-
pen after the ovens have been stacked.
For ovens without CombiWash, skip this step.
a. Push the hoses onto the hose barbs and secure
with hose clamps.
b. Both top and bottom ovens MUST be connected
with the hose assembly provided.
12. Remove both left and right body sides of top oven by
removing two (2) screws and lifting panel o oven.
Figure 10
Figure 11
Blue and red dots indicating hose
locations
Top oven cleaning system hoses
shown
Figure 12
Loading ...
Loading ...
Loading ...