Loading ...
Loading ...
Loading ...
5.Menu Interpretation
58
you can also choose to close the measurement menu.
5.17.2 [Time Spec On Off]
Turn on time spectrum measure mode.
5.17.3 [ACPR On Off]
Turn on or off the adjacent channel power measurement. Press
【Meas Setup】 to pop up the parameters of the adjacent channel
power measurement soft menu. The adjacent channel power is
used to measure the ratio of the adjacent channel power of the
transmitter. The absolute value of the main channel power and the
absolute value of the adjacent channel power are obtained by the
linear power integration method, so that the adjacent channel
power ratio is gained.
5.17.4 [Chanel Power On Off]
Turn on or off channel power measurements. Press 【Meas Setup】
to pop up the channel power measurement parameter settings soft
menu. The channel power is used to measure the transmitter
channel power, according to the user set the channel bandwidth,
through the linear power integration method to obtain the absolute
value of the main channel power.
5.17.5 [OBW On Off]
Turn on or off the occupied bandwidth measurement. Press
【Meas Setup】 to pop up the parameter setting soft menu for
occupying the bandwidth measurement. Occupied Bandwidth is a
measure of the bandwidth occupied by the transmitter signal can
be measured from the total power ratio within the in-band power
span, with a default value of 99% (the user can set this value).
5.17.6 [Pass-Fail►]
Enter the pass / fail measurement function soft menu. Pass / fail
measurement has two modes of window measurement and area
Loading ...
Loading ...
Loading ...