Loading ...
Loading ...
Loading ...
5.Menu Interpretation
57
Spectral Density at the cursor is read. When turned on, the
average noise level read at the frequency scale is normalized to 1
Hz bandwidth for noise power.
5.16.4 [Freq Count＞]
Activate the frequency counter function and display the count
results in the upper right corner of the screen. The counter counts
only the signals that are displayed on the screen. The frequency
count also pops up an additional counter function for the soft menu,
including [Freq Count On Off ].
1) [Freq Count On Off]
Turn on or off the frequency counter mode. This function is invalid
when the trace signal generator is activated. The count value is
displayed in the upper right corner of the screen.
2) [Resolution]
Counter resolution is divided into 1 kHz, 100 Hz, 10 Hz, 1Hz.
Changing the counter resolution can change the counter accuracy.
The higher the resolution, the higher the counting accuracy.
3) [Return]
Return to the previous menu.
5.17 【Meas】Measurement
Provide a variety of advanced measurement functions, pop-up
spectrum analyzer built-in and user-defined measurement function
soft menu, turn on or off the time spectrum, adjacent channel
power measurement, channel power measurement, occupied
bandwidth, Pass-Fail measurement menu.
5.17.1 [Measure off]
You can directly close the currently running measurement function,
Loading ...
Loading ...
Loading ...