Loading ...
Loading ...
Loading ...
5.Menu Interpretation
50
Set the triggering mode to single trigger or continuously trigger.
⚫[Trigger Level]
Set the trigger level as a percentage of the depth.
⚫ [Trigger Delay]
Set the trigger delay time.
⚫[Return]
Return to the previous menu.
d)[Return]
Return to the previous menu.
4) [data Reset]
Set the maximum, minimum, and average data reset under the FM
modulated signal.
5) [Return]
Return to the previous menu.
5.13 【Peak】
Executes peak searching immediately and opens the Peak setting
menu.
Key Points:
⚫ If Max is selected from the Peak Search option, it will search and
mark the maximum on the trace.
⚫
The peak search of Next Peak, Peak Right, Peak Left or peaks
in the peak table must meet the specified parameter condition.
⚫
The spurious signal at the zero frequency caused by LO feed
through is ignored.
5.13.1[Mkr→CF]
Used to move the peak point to the center frequency point.
5.13.2 [Peak→Peak]
Execute peak search and a min. search at the same time and mark
Loading ...
Loading ...
Loading ...