Loading ...
Loading ...
Loading ...
Fall Detection Radar User Manual
15
Note
● The SNMP version you select should be the same as that of the SNMP software.
● Use different versions according to the security levels required. SNMP v1 is not secure and
SNMP v2 requires password for access. SNMP v3 provides encryption and if you use the third
version, HTTPS protocol must be enabled.
3. Set the SNMP parameters.
4. Click Save.
5.7 Set IEEE 802.1X
IEEE 802.1X is a port-based network access control. It enhances the security level of the
LAN/WLAN. When devices connect to the network with IEEE 802.1X standard, the authentication
is needed.
Steps
1. Go to Configuration → Network → Network Parameters → 802.1X.
2. Check Enable 802.1X.
Figure 5-5 Set IEEE 802.1X
3. Select Protocol Type and EAPOL Version.
Protocol Type
The authentication server must be configured. Register a user name and password for 802.1X
in the server in advance. Enter the user name and password for authentication.
EAPOL Version
The EAPOL version must be identical with that of the router or the switch.
4. Enter User Name and Password registered in the server.
5. Confirm the password.
6. Click Save.
Loading ...
Loading ...
Loading ...