Loading ...
Loading ...
Loading ...
Fall Detection Radar User Manual
12
6. Click Save.
What to do next
When the registration status is online, you can add or manage the device via the platform
software. Refer to its corresponding manual for details.
5.4.2 Connect to Hik-Connect
The device can be remotely accessed via Hik-Connect.
Enable Hik-Connect Service on Radar
Hik-Connect service should be enabled on your radar before using the service. You can enable the
service through Web browser.
Before You Start
● Connect the device to the Internet.
● Set the IP address, subnet mask, gateway, and DNS server of the LAN.
Steps
1. Go to Configuration → Network → Data Connection → Hik-Connect Platform.
2. Check Enable.
3. Select Protocol Version.
4. Optional: Check Custom to enter the deployed server IP address.
5. Click Save.
Note
Check the network connection if the Register Status is Offline.
What to do next
Use the Hik-Connect mobile client to add the device.
Set Up Hik-Connect
Steps
1. Get and install Hik-Connect application by the following ways.
– Visit https ://appstore.hikvision.com to download the application according to your mobile
phone system.
– Visit the official site of our company. Then go to Support → Tools → Hikvision App Store.
– Scan the QR code below to download the application.
Loading ...
Loading ...
Loading ...