Loading ...
Loading ...
Loading ...
Fall Detection Radar User Manual
6
3.2 Set Detection Parameters
Set radar detection parameters according to the actual needs and installation environment.
Steps
1. Click Falling Monitoring.
Figure 3-2 Set Detection Parameters
2. View the radar information.
Radar Status
The current radar status. The radar can be normally used in normal status. If the radar is in
upgrading status, do not reboot the device.
Software Version
The software version of the radar.
3. Set the radar detection parameters.
Event Triggered Time
If the target falls and stands up within the set Event Triggered Time, the system will not
output fall alarm.
Sensitivity Threshold of Human Body Detection
The higher the value is, the less sensitive the detection will be. The default value is
recommended.
4. Set Detection Area.
5. Optional: You can also do the following operations.
Adjust the view scale.
Export Data
Click Export Data, select the saving path, and click OK to export the
location information.
Loading ...
Loading ...
Loading ...