Loading ...
Loading ...
Loading ...
Access Controller·User Manual
60
1) Select the cards to add as first card for the door
Note: Please set the card permission and apply the permission setting to the access control
device first. For details, refer to Chapter 7.7 Permission Configuration.
2) Click OK button to save adding the card.
6. You can click Delete button to remove the card from the first card list.
7. Click Save to save and take effect of the new settings.
7.8.4 Anti-Passing Back
Purpose:
You can set anti-passing back for card readers in the same access controller. You should swipe the
card according to the configured swiping card route. And only one person could pass the access
control point after swiping the card.
Notes:
Either the anti-passing back or multi-door interlocking function can be configured for an
access control device at the same time.
You should enable the anti-passing back function on the access control device first.
Setting the Path of Swiping Card (Card Reader Order)
Steps:
1. Click Anti-passing Back tab to enter the following interface.
Loading ...
Loading ...
Loading ...