Loading ...
Loading ...
Loading ...
Access ControllerยทUser Manual
56
7.8.1 Access Control Parameters
Purpose:
After configuring the person, template, and access control permission, you can configure the
advanced functions of access control application.
Click Access Control Parameters tab to enter the parameters settings interface.
Door Parameters
Steps:
1. In the controller list on the left, click to expand the access control device, select the door
(access control point) and you can edit the information of the selected door on the right.
2. You can editing the following parameters:
Door Magnetic: The Door Magnetic is in the status of Remain Closed (excluding special
conditions).
Exit Button Type: The Exit Button Type is in the status of Remain Open (excluding special
conditions).
Door Locked Time: After swiping the normal card and relay action, the timer for locking the
door starts working.
Door Open Duration by Card for Door Extended Opening: The door magnetic can be enabled
with appropriate delay after card holder swipes the card.
Door Open Timeout Alarm: The alarm can be triggered if the door has not been close
Enable Locking Door when Door Closed (Reserved): The door can be locked once it is closed
even if the Door Locked Time is not reached.
Duress Code: The door can open by inputting the duress code when there is duress. At the same
Loading ...
Loading ...
Loading ...