Loading ...
Loading ...
Loading ...
6
Add Master User under Normal Mode
1. Activate the lock
by pressing any key
on the lock;
+
2. Press and hold “+” key
for 3 seconds to enter
master user registration
state; (the ID shows “96”)
4. Fingerprint User: Place the
finger on the sensor in 2 times;
(Register Success: the keypad
shows “Green” light with sound;
Register Fail: the keypad shows
“Red” light with sound);
x2
5. Password User: input the
password in 2 times; (Register
Success: the keypad shows
“Green” light with sound;
Register Fail: the keypad shows
“Red” light with sound);
***
x2
6. The lock will show the next ID
for registering another user, repeat
the steps above if there are other
users need to be registered. If not,
you can press “C” to exit.
1. Once finishing the user's registration, please try to unlock the lock
to make sure the user registration is successful.
3. Press “+” and “-“ key
to select the ID, then
press “OK” to confirm;
2.When there is master user registered in the lock, the lock will switch to
“Security Mode” automatically.
=3S
“Green” “Green”
C
+
OR
11
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...