Loading ...
Loading ...
Loading ...
EN
15
11 - System setting
With the oven on, press the
SET
key to access the SYSTEM
menu. This menu permits setting of parameters or special
functions. It also permits accessing the error events list.
1. Press the keys to select the sub menu and confirm with
the
START
key.
2. Use this menu to change the following settings:
Press the keys to select the item to be set or to be
displayed from among the three available ones and
confirm with the
START
key.
EVENT LOGS
MAIN VOLTAGE
SYSTEM
DEMO
OM 15
Event Log
The menu permits checking any recorded errors. These codes
can be notified to the after-sales service.
01 12/11/2015 07:06 CODE: F10305
EVENT LOGS
02 17/11/2015 13:17 CODE: F10305
Main Voltage
The purpose of this option is to set the type of appliance power
supply during installation. Press the keys to select 240V
or 208V according to the mains supply in your home and then
confirm with the
START
key.
To avoid accidentally changing these settings, a double
confirmation is required.
MAIN VOLTAGE
240
ADVANCED
Demo
The purpose of this function is to set the DEMO mode, which
makes the oven useless for cooking but automatically performs
a demonstration of functions.
1. Press the keys
to select the item ON.
2. Confirm with the
START
key.
3. Press the
ON/OFF
key
After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any key
pressed for a few seconds until the oven switches to standby.
To start it again, press the
ON/OFF
key.
To disable the function, enter the DEMO display page and set
OFF. Confirm using the
START
key.
NOTE: Once set, the function remains enabled even if the
oven is disconnected from the power mains.
DEMO
ON
Loading ...
Loading ...
Loading ...