Loading ...
Loading ...
Loading ...
WARNING
The ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based cleaner
products. Use rubber gloves to protect hands. Carefully read the material safety instructions on the
container of the ice machine cleaner.
8. Open the water faucet of the main water supply. Let the water flow into the unit. Again, press the
“TIMER CLEAN” button on the control panel for more than 5 seconds to enter the self-cleaning
program. The water pump runs for 8 minutes and stops for 3 minutes and repeats this process for the
total duration time of 30 minutes. During this process, the “CLEAN” light will always be on and the
digit window will indicate the remaining time. Through this process, the machine will rinse the water
dividing pipe, evaporator, water pump, silicone pipe, and water tank, etc.
9. After one self-cleaning program complete, pull out the water tank’s drainpipe and drain the cleaning
solution down to the lower ice storage bin. Shake the unit slightly to drain out all of the water
completely. Then, reinstall the drainpipe to the water tank slot tightly.
10. Repeat the step 8-9 again for 2 times.
11. Following the above program to clean the ice storage bin.
12. With this special cleaning program finished, you can return to the regular ice making mode. We
suggest that you discard the first batch of ice cube after cleaning for safety purposes.
Cleaning Suggestion
1) DAILY CLEANING
The ice shovel, door and the water dividing pipe should be cleaned per each day. At the end of every
day, rinse the ice shovel and wipe the both sides of the door with a clean cloth.
2) SEMI-MONTHLY CLEANING
The ice shovel, ice bin, water tank, the ice detecting plate and the surface of the evaporator are
to be cleaned semi-monthly according to interior cleaning program.
3) SEMI-ANNUAL CLEANING
All the components and surfaces exposed to water or ice cubes, like ice storage bin, water tank, door,
evaporator, water pump, silicone tube, water dividing pipe, etc. should be cleaned by Using Nu-Calgon
Nickle Safe Ice-machine Cleaner every 6 months. They should be cleaned by the serviceman
according to ice making assembly system cleaning program.
Loading ...
Loading ...
Loading ...