Koolmore BIM75BS 15 Inch Built-In/Freestanding Undercounter Ice Maker with 75lbs Daily Capacity,

User Guide - Page 17

For BIM75BS.

PDF File Manual, 24 pages, Read Online | Download pdf file

BIM75BS photo
Loading ...
Loading ...
Loading ...
WIRING DIAGRAM
Normal Sounds
Your new ice maker may make sounds that you are not familiar with. Most of these sounds are
normal. Hard surfaces like the floor, walls and cabinets can make the sounds seem louder than they
are. The following describes the kinds of sounds that might be new to you and what may be making
them.
• You will hear a swooshing sound when the water valve opens to fill the water tank for each cycle.
• Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of
the ice maker can also make noises.
• The high-efficiency compressor may make a pulsating or high-pitched sound.
• Water running from the water tank to the evaporator plate may make a splashing sound.
• Water running from the evaporator to the water tank may make a splashing sound.
• As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your icemaker.
• You may hear air being forced over the condenser by the condenser fan. During the harvest cycle, you
may hear ice cubes falling into the ice storage bin.
• When you first start the ice maker, you may hear water running continuously. The ice maker is
programmed to run a rinse cycle before it begins to make ice.
Preparing Ice Maker for Long Storage
If the ice maker will not be used for a long time, or is to be moved to another place, it will be necessary
to drain out all the water in the system.
1. Allow all the ice cubes to be ejected from the evaporator of the ice maker.
2. Turn off the unit and unplug the power cord.
3. Shut off the water supply at the main water supply.
4. Disconnect the water supply hose from the water inlet valve.
5. Pull out the water tanks drainpipe (labeled as “H” in the illustration on Page 5) to drain out all the
water in the water tank. When all of the water has been drained out, you can reinstall the water
drainpipe back into the water tank.
6. Then drain out all the water from the water drain port located at unit back (labeled “7” in the
illustration on Page 5
Loading ...
Loading ...
Loading ...