Loading ...
Loading ...
Loading ...
4. When the End of Cycle symbol will light up and the machine will stop working when the ice-
making process is complete.
5. Shut down the unit: After the unit has completed making ice, press the “ON/OFF” button on the
control panel. The unit will shut down and enter standby mode. If you press "ON/OFF" longer than 5
seconds during ice making, then the unit enters the deicing process directly. This function can help
remove the ice on the ice plate. Press the "ON/OFF" button to shut down the machine.
6. Timing setting: Setting range: 1-24 hours
• Time shutdown: When the unit is running it can be set shutdown at a specific time.
• Time on: When the unit is on standby mode, you can set the unit to turn on with ON-TIMER. Press
the TIMER button. The default time is “1H” or 1 hour, in the display window. Press the “+” button to
adjust the timer to what you desire. Every time you press the “+” button, the timer will add 1 hour.
Press the “-” button to reduce the timer. During the process of time adjustment, the “H” in the lower
corner of the number will flash. After 5 seconds without any additional changes to your timer, the “H”
letter will change from flashing to constant, meaning that the timer has been set.
• In standby mode the unit will display “5H” meaning that the unit will start automatically after 5 hours
idle.
• The “H” in the display screen indicates that the machine currently has a timer set. You will see the
time will descend (i.e. 5H, 4H, 3H, and so on) until the unit turns on or off depending on the mode it is
currently set to.
• How to cancel timing: When the unit has a timer press and hold down the “TIMER” button. The timer
will be canceled after the number on the screen and “H” are extinguished.
7. Automatic self-cleaning program. The default cleaning time is 20 minutes.
• Start the self-cleaning program: After connecting all the water pipes, plug in the main power supply
plug, then press the “TIMER CLEAN” button on the control panel for more than 5 seconds. In the
self-cleaning program, Self-Cleaning symbol will rotate on the display screens. The time count
down display will show 20M. The CLEAN light will always be on during this period. The digit window
will indicate the left time in the program. The water pump will run for 8 minutes and stop for 3 minutes
and repeat. The total duration time is 20 minutes for one self-cleaning program. When the water pump
stops and the self-cleaning program is complete, the water will supply the water tank automatically.
• Cancel the self-cleaning program: It takes about 20 minutes to complete one self-cleaning
program. When the program is over, the system will be in off-state automatically. You can press the
“ON/OFF” button on the control panel to cancel the self-cleaning program by force.
8. Switching the Degrees Settings from Fahrenheit (°F) to Celsius(°C)
Press the “+” or “-” button for longer than 5 seconds and it will automatically switch.
Loading ...
Loading ...
Loading ...