Loading ...
Loading ...
Loading ...
4. Lift the door up and take off the door.
5. Set the freezer door on a non-scratch surface with the exterior up.
6. Unscrew the 2 screws on the handle, fix on the opposite side of the door. Remove the screw on the
right fix piece, attach the left fix piece (from accessory bag) to the door.
7. Remove the right bottom hinge by removing the 3 screws, then fix the 3 screw back without hinge.
8. Remove the hinge pin on the right bottom hinge and reinstall on the left bottom hinge.
9. Remove the 3 screws from the left side and fix the left bottom hinge on the unit.
10. Place the door on the left bottom hinge. With the magnetic gasket holding the door in place, make
sure the door is aligned with the unit, and secure the top hinge on the left with 2 screws.
11. Open and close both the door several times to confirm the door is positioned correctly and the
gasket is sealed well. If this is not the case, please adjust the door again.
12. Attach the Fix plate back on the right side. Fix the top cover with 2 screw, cover the screw hole with
the Screw hole cover.
13. Wait at least 30 minutes before plugging in the refrigerator to allow the refrigerant to settle down.
Then plug in the unit.
10
Right bottom
Hinge
hinge pin
Handle
Left fix
piece
Right fix
piece
Handle
Move
Change
Left bottom
hinge
Hinge pin
Top
Hinge
Fix plate
Top cover
Screw hole cover
Loading ...
Loading ...
Loading ...