Loading ...
Loading ...
Loading ...
INTERIOR CLEANING
For Ice Storage Bin
The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the
first time and reused after stopping for an extended period. It is usually convenient to sanitize the bin
after the ice making system has been cleaned and the storage bin is empty.
1. Disconnect power from the unit.
2. Open the door and with a clean cloth, wipe down the interior with a sanitizing solution made of 28g
of household bleach or chlorine and 7.5L of hot water (95Fto 115F).
3. Rinse thoroughly with clear water. The wastewater will be drained out through the drainpipe.
4. Reconnect power to the unit. The ice scoop should be washed regularly. Wash it just like any other
food container.
WARNING
DO NOT use solvent cleaning agents or abrasives on the interior. These cleaners may transmit taste
to the ice cubes or damage or discolor the interior.
Ice Making Parts Cleaning
Periodically clean the main system of your icemaker.
Suggestion: After cleaning the interior parts and reinstalling to its respective position, discard the
first batch of ice for food safety purposes.
1. Repeat above step to clean the water tank and other
inner parts of the unit.
2. If there is no water flowing out from the water dividing
pipe, or the water flowing is very low, please discharge this
water dividing pipe to clean carefully. Clean each little hole
on the water dividing pipe displayed in the illustration to
the right. Make sure each hole is not clogged by
something, then install back to the original location.
3. When there are ice cubes on the surface of the
evaporator, but can’t fall down easily, do not use a
mechanical object to remove it by force; Only press the
“ON/OFF” button for more than 5 seconds. The unit will
enter the ice melting process. After some time, the big
ice-cubes will fall down. Then, turn off the unit and unplug
the power cord to clean the surface of the evaporator.
4. The water tank and the ice detecting plate is very
important to keep your ice cube hygienic. Put a mixture of
neutral cleaner and water into a clean water jet, then spray
the inner surface of tank and ice detecting plate. Wipe
these surfaces as far as possible with a clean cloth. And
then, spray the surfaces with clean water, wiping with a dry
clean cloth. Then, drain out the cleaned water in the water
tank by pulling out the water tank’s drainpipe (labeled “H”
in the illustration on Page 5). When all of the cleaned water
has been drained out, reinstall the water tank’s drainpipe.
Loading ...
Loading ...
Loading ...