Loading ...
Loading ...
Loading ...
English 9
Symbols on the device
Intended use
Use the sweeper for cleaning indoor and outdoor surfaces.
The sweeper is designed for commercial use.
Only use the sweeper in accordance with the information in these
operating instructions. Any other use is considered as improper
use. The manufacturer assumes no liability for any resultant dam-
age. The user is solely responsible for the risk.
No modifications must be made to the sweeper.
The sweeper is only suitable for use on the surfaces listed in the
operating instructions.
Foreseeable misuse
The device is not designed for driving on slopes.
Never sweep or suction up explosive liquids, gases, non-diluted
acids or solvents (e.g. petrol, paint thinner, heating oil) because
they form explosive vapours or mixtures in conjunction with the
suction air.
Never sweep or suction up acetone, non-diluted acids or sol-
vents, as they will corrode and damage the materials used on the
device.
Never sweep or suction up reactive metal dusts (e.g. aluminium,
magnesium, zinc). They form explosive gases in conjunction with
highly alkaline or acidic cleaning agents.
Do not sweep or suction up burning or smouldering objects.
There is a risk of fire.
Do not sweep up any harmful substances.
The device is not suitable for sweeping up fluids.
Standing in hazard zones is prohibited. Operation in explosive
spaces is prohibited.
This device must not be used to push/pull or transport objects.
Suitable surfaces
The device is suitable for the following surfaces:
● Asphalt
● Industrial floors
● Screed
● Concrete
● Paving stones
Safety instructions
몇 WARNING
The device is not intended for use by children, persons with re-
stricted physical, sensory or mental abilities or persons unfamiliar
with these instructions.
몇 WARNING
Children must be supervised to prevent them from playing with
the appliance.
몇 WARNING
Only use the device for its proper use. Take into account the local
conditions and beware of third parties, in particular children,
when working with the device.
몇 CAUTION
Check the device with the equipment prior to each use to make
sure it is safe and working correctly. Only use the device when it
is in a correct condition.
DANGER
No changes may be made to the device.
DANGER
Risk of explosion! Keep highly flammable substances away from
the device.
DANGER
Risk of injury! Before carrying out any work on the device, turn the
programme switch to "0" and remove the battery.
몇 WARNING
Risk of crushing and chafing on belts, side brushes, container
and push handle.
몇 CAUTION
Risk of injury! Wear sturdy protective gloves when removing
glass, metal or other sharp-edged materials from the dirt recep-
tacle.
Device description
The device requires a 36 V battery pack from the Kärcher Battery
Power / Battery Power+ system and the corresponding charger
to operate. Both are not included in the scope of delivery and can
be purchased separately according to the application require-
ment.
Information on suitable battery packs and chargers can be found
at www.kaercher.com.
Device illustration
Illustration A
1 Carrying handle
2 Filter cleaning handle
3 Right side brush
4 Twist grip for side brush contact pressure
5 Dust suction release mechanism
6 Cover of fan for dust suction
7 Storage shelf for accessories, maximum load 5 kg
8 Star grip for push handle adjustment (2x)
9 Rechargeable battery pack*
10 Charger*
11 Push handle
12 Waste container seal
13 Roller brush
14 Type plate
15 Cover of battery pack holder
16 Program switch
17 Battery pack release
18 Battery pack holder
19 Lever for roller brush contact pressure (sweeping pattern)
20 Dust suction seal
21 Fan for dust suction
22 Waste container handle
23 Flat fold filter
24 Fastening eyelet
25 Left side brush
26 Removable waste container
*Option, not included in the scope of delivery.
Initial startup
Mounting the push handle
1. Position the push handle on the device.
Illustration B
1 Screw
2 Push handle
3 Star grip
4 Washer
2. Insert the screw through the push handle holder and the push
handle.
3. Put on the washer.
4. Put on the star grip and tighten it.
5. Repeat entire procedure on the opposite side.
Contact pressure of roller brush
Parking position of roller brush
Filter cleaning
Contact pressure of side brushes
Loading ...
Loading ...
Loading ...