Loading ...
Loading ...
Loading ...
126
13 System Configuration
13.1 Basic Configuration
1. Click System > Basic.
2. Configure the parameters.
NOTE!
âš« Only admin can set Enable Password Protection.
âš« If Enable Password Protection is not selected, no
password is required for local login at system startup.
However, a username and password are still required
when you log in after a logout.
âš« Some NVR models support Intelligent Mark. When the
NVR and IP camera are both enabled, the latest
areas/lines or VCA data configured for face detection,
intrusion detection, and cross line detection will be
displayed on the Preview, Behavior and Alarm windows
in real time.
âš« Intelligent mark is displayed on the screen as areas/lines
in different colors. Yellow means areas/lines configured for
face detection, intrusion detection, and cross line
detection; green means VCA data has changed but not
triggered rules; red means rules are triggered in the
configured area (rules are configured for VCA alarms),
and VCA alarm has occurred.
âš« You may also set startup Wizard here by clicking Wizard.
3. Click Apply to save the settings.
Loading ...
Loading ...
Loading ...