Loading ...
Loading ...
Loading ...
105
11 Network Configuration
Network configuration is required if your NVR operates in a network.
NOTE!
The default IP address is 192.168.0.100 for NIC 1 and
192.168.1.100 for NIC 2, and likewise.
11.1 Basic Configuration
11.1.1 TCP/IP
1. Click Network > Basic > TCP/IP.
2. Set the network parameters as needed. DHCP is enabled by
default.
You can choose a working mode if your NVR has two NICs:
âš« Multi-address mode: The two NICs work independently
and can be configured separately. Either NIC can be
chosen as the default route, and data will be forwarded
through this NIC when the NVR connects to the extranet.
âš« Load Balance mode: The two NICs are bound to the same
IP address and work together to share network traffic.
âš« Net Fault-tolerance mode: The two NICs are bound to the
same IP address. In cases where one NIC fails, the other
takes over service seamlessly from the faulty one to
ensure network connectivity.
Loading ...
Loading ...
Loading ...