Loading ...
Loading ...
Loading ...
114
NOTE!
âš« Automatic mapping (Auto) is recommended. Ports will
conflict if not configured properly.
âš« For an NVR with multiple NICs, port mapping should be
configured based on the NIC specified as the default
route.
3. Click Refresh and check that Active is displayed for these ports
under UPnP Status.
4. Click Apply to save the settings.
11.3.3.2 Manual Port Mapping
If your router does not support UPnP, then you need to configure
internal and external ports manually.
NOTE!
âš« The principle of port mapping is that the internal and
external ports of the NVR are consistent with that of the
router.
âš« Some routers may require the same internal and external
ports for the NVR and the router.
1. Click Network > Advanced > Port Mapping.
2. Select Manual for Mapping Mode, and then set external ports
manually.
Loading ...
Loading ...
Loading ...