Loading ...
Loading ...
Loading ...
-19-
Model W1830 (For Machines Mfd. Since 4/15)
SERVICE
SERVICE
This section covers the most common service adjustments
or procedures that may need to be made during the life
of your machine.
If you require additional machine service not included
in this section, please contact Woodstock International
Technical Support at (360) 734-3482 or send e-mail to:
tech-support@shopfox.biz.
General
Replacing.Fuse
MAKE. SURE. that. your. machine. is.
unplugged. during. all. service. proce-
dures!. If. this. warning. is. ignored,. seri-
ous.personal.injury.may.occur.
The fuse on the control panel will blow in the case of a
thermal overload.
Replace the fuse only with a fast-acting, 2 amp, 250V fuse
(Part Number X1830055).
Tool.Needed. Qty
Phillips Screwdriver #2 .........................................1
To.replace.the.machine.fuse,.do.these.steps:
1. DISCONNECT MACHINE FROM POWER!
2. Unthread the fuse holder cap from the control panel
(see Figure.14) and remove it. The fuse will come
out with it.
3. Replace the fuse and fully thread the cap in to
secure it.
Remote.Control.Battery.
Replace ment
The remote control uses two AA batteries. To replace
them, slide the battery compartment cover down and off
the remote (see Figure.15). Insert the batteries in the
proper direction and replace the cover.
Figure 15. Remote control battery
compartment cover removed.
Batteries
Cover
Figure 14. Fuse holder cap on the control
panel.
Fuse
Holder Cap
Loading ...
Loading ...
Loading ...