Loading ...
Loading ...
Loading ...
-15-
Model W1830 (For Machines Mfd. Since 4/15)
SETUP
Note: Some positions for the ceiling hooks may be
slightly uneven from each another. To make up for
this, minor adjustments can be made to the length
of the hanging assembly by adjusting the amount
that the machine hook is threaded into the air filter
housing (see Figure 11). After adjusting the hook
height, tighten the hex nut to secure the hook.
3. Drill a
3
⁄32" pilot hole into the center of the joists at
the mounting locations, then fully thread the ceiling
hooks into the joists (see Figure 12).
Important: If the joists are covered with sheet rock
or paneling, use a stud finder or other device to
locate the center of the joists.
4. Attach the provided chains to the ceiling hooks.
5. With the help of another person to hold the air
filter up, attach the other end of the chains to the
machine hooks.
Figure 11. Machine hook partially
threaded to adjust the hanging length.
Hex Nut
Joist
Ceiling
Hook
Machine
Hook
Figure 12. Air filter mounted to the joists.
THIS AIR FILTER IS TO BE USED FOR
WOOD DUST ONLY..Do.not.use.it.to.
filter.toxic.fumes,.paint.spray,.or.
dissipate.smoke.or.fumes,.which.could.
damage.the.filters.
Loading ...
Loading ...
Loading ...