Loading ...
Loading ...
Loading ...
-14-
Model W1830 (For Machines Mfd. Since 4/15)
SETUP
The Model W1830 performs best when hung from the
ceiling.
The advantage of having the air filter mounted to the
ceiling is that the air circulation pattern is not blocked by
equipment and obstacles closer to the floor.
When choosing a location to mount the air filter to the
ceiling, keep in mind the clearance necessary underneath
the machine for foot traffic or other operations. The
mounting chains can be used at full length, which will
bring the bottom of the air filter to approximately 25
1
⁄2"
from the ceiling, or the chains can be doubled-up, which
will bring the unit approximately 19
1
⁄2" below the ceiling.
Important: The ceiling hooks must only be screwed into
solid wood. Otherwise, they may pull out under load and
cause the air filter to fall.
To.mount.the.air.filter.to.the.ceiling,.do.these.steps:
1. Replace the four Phillips head screws shown in
Figure.9 with the four provided machine hooks (see
Figure.10).
2. Tighten each hex nut on the hooks against the air
filter body to secure them in place.
Mounting.to.Ceiling
ONLY.mount.the.air.filter. unit.to.joists.
or. table. that. can. hold. at. least. 100.
lbs.. DO. NOT. mount. the. unit. only. to.
sheet. rock,. pressboard,. paneling,. or.
honeycomb.wall.panels.with.expansion-
type.fasteners..The.fasteners.can.tear.
out.and.the.air.filter.can.fall..Ignoring.
this. caution. can. result. in. injury. or.
property.damage.
Figure 9. Remove these Phillips head
screws.
Phillips Head Screws
Figure 10. Machine hook installed.
Hex Nut
Hook
Loading ...
Loading ...
Loading ...