Loading ...
Loading ...
Loading ...
40
AXIS M10 Series - System Options
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending on the level of
security required, select the version of SNMP to use. The three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community
name can be specified as a password for read or read/write access
to all supported SNMP objects. The community is the the group of network devices using SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS
must be enabled.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a managemen
t system for important events or status changes. These
settings are used with SNMP v1/v2. To activate trap reporting, enter the IP address of the management server, and choose the
trap community to use when sending a trap message to the management system.
SNMP v3 is a more secure version providing en
cryption and secure passwords. To use SNMP v3, HTTPS must be activated. To
use traps with SNMP v3 an SNMP v3 management application is needed.
See the online help for more information.
UPnP™
The network camera includes support for UPnP™. This is enabled by default, and the network camera then is automatically
detected by operating systems and clients that support this protocol.
RTP/H.264 & MPEG-4
These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video
stream(s) in multicast H.264/MPEG-4 format. Only certain IP addresses and port numbers should be used for multicast
streams. For more information, please see the online help .
Bonjour
The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.
Ports & Devices
I/O Ports
This page allows configuration of the input and output ports supported by this device.
PIR Sensor
PIR Sensor State - This setting shows the current state of the PIR Sensor.
Sensitivity Settings - Sensitivity Settings is used to adjust the sensitivity of the PIR Sen
sor from 0 - 100%. The default
sensitivity is 75%.
By increasing the sensitivity, the range of the PIR Sensor is also incr
eased. The PIR Sensor can be configured to detect
movement in the dark up to a maximum range of 6 meters. Move the Sensitivity slider to adjust the PIR Sensor’s sensitivity
and range.
LED Settings
The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all)
when the unit is accessed. For a listing of all LED behavior, see page 7, or the online help .
Loading ...
Loading ...
Loading ...