Loading ...
Loading ...
3
used, but only when the blender is
not running.
18. The tamper provided must be used
only when the main part of the lid
is in place.
19. Blades are sharp. Clean around the
blade assembly in the container
with extreme care to avoid injury.
20. To reduce the risk of injury, never
place a blade assembly on the
motor base unless assembled to
the Vitamix container.
21. Care should be taken when
handling the sharp cutting blades,
emptying the container and during
cleaning.
22. Do not leave foreign objects, such
as spoons, forks, knives or the lid
plug, in the container as this will
damage the blades and other
components when starting the
blender and may cause injury.
23. Never attempt to operate with
damaged blades.
24. Never attempt to operate with the
centring pad removed.
25. Always operate blender with lid
and lid plug firmly in place. DO
NOT remove 2-part lid while blades
are rotating. Only remove the lid
plug to add ingredients and to use
the tamper.
26. When blending hot liquids or
ingredients in the 64 oz. container,
use caution; spray or escaping
steam may cause burns. Do not
fill container to the maximum
capacity. Always begin processing
on the lowest speed setting,
variable speed 1. Keep hands and
other exposed skin away from lid
opening to prevent possible burns.
27. DO NOT use your 20 ounce cup
to heat ingredients or to blend hot
liquids. Heated ingredients and
liquids may create internal pressure
which could cause the cup to burst
and cause injury.
28. DO NOT continuously use your
machine for more than 75 seconds
with the 20 ounce cup.
29. If a cup becomes warm to
the touch or steams or vents,
immediately stop blending
ingredients and turn o or
unplug blender. Allow the cup
and ingredients to cool to room
temperature before removing the
blade base.
30. When making nut butters or oil-
based foods, do not process for
more than one minute after the
mixture starts to circulate in the
container. Processing for longer
periods can cause overheating.
31. Make sure that the container or
cup and personal cup adapter
are flush with the centring pad to
make sure that the drive spline
is engaged with the drive socket
before operating.
32. Make sure to use the seal on the
blade base and tighten the cup
adequately to the blade base
before blending.
33. Never place the personal cup
adapter onto the blade base
without the cup attached.
WARNING
To avoid injury.
Read and understand
instruction manual
before using this
machine
.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...