Loading ...
Loading ...
Loading ...
88
7. Select from the following options:
• To change the saved file type, select File Type and select a file type.
• To change the color type of the scanned image, select Image Type and select an option.
• To change the resolution, select Resolution and select an option from either Low (200 dpi),
Medium (300 dpi), or High (600 dpi).
• To change the size of the scanned original, select Original Size and select an option.
• To scan both sides of the original, select Source and select 2-Sided.
• To change the number of copies to print when a printer is selected as the destination, select
Copies and enter a number.
8. If you want to change the scanner settings for the current job, select Scanner Settings on the
control panel.
Note: If an administrator has locked the settings, you may need to enter the administrator password
to change certain scanner settings.
9. Select from the following options:
• To increase the force used to separate originals in Delicate Mode, enable Power Separation
Mode (DS-32000).
Caution: Do not use Power Separation Mode with thin originals, or you may damage them.
• To slow down the scanning speed, set the Slow setting to On.
• To stop scanning immediately when a double feed is detected, set the Double Feed Stop Timing
setting to Immediate. When set to After Eject, the double feed is scanned and ejected before
scanning ends.
• To skip double feed detection when scanning originals such as envelopes or plastic cards, set the
DFDS Function setting to On.
• To stop scanning immediately when a skewed original or feeding error is detected, enable the
Paper Protection setting. When set to higher levels, the setting reduces the amount of skew
required to trigger a stop. Select higher settings when scanning thin papers. Select Off when
scanning plastic cards or thick paper. Lower the setting level if the scanner is too sensitive to
paper skew.
• To detect dirt on the scanner glass, enable the Detect Glass Dirt setting.
Loading ...
Loading ...
Loading ...