All-Clad EH800D51 User Manual

Loading ...

USE

1. Plug the Sous Vide Circulator into a power supply, the circulator will beep once. (Fig. 5)

2. Press & hold the Start / Stop button for 1 second to turn on the display; you can now start setting the temperature

and time. (Fig. 6)

SET UP THE TEMPERATURE AND TIMER

1. Press the Temp / Time button, the temperature display will start ashing. (Fig. 7)

2. Turn the knob to adjust the temperature until you reach the desired setting, then press the Temp / Time button

to conrm the cooking temperature. (Fig. 8 & 9)

3. After setting your temperature, you can start setting the Timer, the time display will start ashing. (Fig. 10)

4. Turn the knob to adjust the timer until you reach the desired setting, then press the Temp / Time button to

conrm. (Fig. 11)

5. You can now start the preheat cycle by pressing the Start / Stop button. (Fig. 12)

NOTE:

• If you press the Start / Stop button rst, without setting the temperature and time, the preheat cycle will start,

using the last temperature and timer setting used.

• e temperature unit is displayed in °F by default. If you want to change to °C, press and hold the Temp / Time button.

PREHEAT CYCLE

• Press the Start / Stop button to start heating up the water (Fig. 12), the icon will start ashing and the current

temperature will display. (Fig. 13)

Loading ...

All-Clad EH800D51 Sous Vide Immersion Circulator