Loading ...
Loading ...
Loading ...
36
AXIS Q1910/-E/AXIS Q1921/-E - System Options
Use the following IP address - To use a static IP address for the network camera, check the radio button and then make the
following settings:
• IP address – Specify a unique IP address for your camera. (To ch
eck if the IP address you intend to use is available or
not, click the Test button)
• Subnet mask – Specify the mask for the subnet
the camera is located on
• Default router – Specify the IP address of the default router (gateway) used for connecting devices attached to differ-
ent networks and network segments.
IPv6 Address Configuration
Check the box to enable IPv6. Other settings for IPv6
are configured in the network router.
Services
Enable ARP/Ping setting of IP address –
The IP address can be set using the ARP/Ping method, which associates the unit's
MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the
IP address.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit
is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
• Pinging the unit is still possible when this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service provides easy and secure
Internet access to live and recorded video accessible
from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/products/avhs
Enable AVHS - Enabled by default; if AVHS is not to be
used this option can be disabled.
One-click enabled - Press the camera’s control button (see
Hardware overview,
on page 5) to connect to an AVHS service
over the Internet. Once registered, Always will be enabled and the camera will stay connected to the AVHS service. If the
camera is not registered within 24 hours from when the button was pressed, the camera will disconnect from the AVHS
service.
Always - The camera will constantly attempt to connect to the AVHS service over t
he Internet; once registered the camera
will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use
the one-click installation.
AXIS Internet Dynamic DNS Service
Enable this option to use AXIS Internet Dynami
c DNS Service to assign a host name for easy access to your network camera.
Click Se
ttings... to register the camera with AXIS Internet Dynamic DNS Service, or to modify the existing settings (requires
access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS Service for your product can
at any time be removed.
For more information, please refer to
www.axiscam.net and to the online help.
Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name Service) provides
the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP -
Automatically use the DNS server settings provided by the DHCP server. Click the View
button to see the current settings.
Loading ...
Loading ...
Loading ...