Loading ...
Loading ...
Loading ...
Acoustic Imager User Manual
11
Chapter 10 System and Security
It introduces system maintenance, system settings and security management, and explains how to
configure relevant parameters.
10.1 System Settings
10.1.1 View Device Information
You can view device information, such as Device No., Model, Serial No. and Firmware Version.
Enter Configuration → System → System Settings → Basic Information to view the device
information.
10.1.2 Time and Date
You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).
Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Select Manual Time Sync..
4. Choose one time synchronization method.
–
Select Set Time, and manually input or select date and time from the pop-up calendar.
Click Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
Set NTP Server
You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port and Interval.
Loading ...
Loading ...
Loading ...