Loading ...
Loading ...
Loading ...
©
2023 DJI All Rights Reserved.
35
AGRAS T40/T20 P
Unmanned Aircraft Flight Manual
Altitude Zone
When the GNSS signal is strong, the aircraft approaches the boundary
of the Altitude Zone. If it is higher than the altitude limit, the aircraft
decelerates and hovers in place.
When the GNSS signal changes from weak to strong, the app starts a
100-second countdown. Once the countdown is over, the aircraft will
descend and hover below the altitude limit.
Free Zone The aircraft ies normally with no restrictions.
Semi-Automatic Descent: All stick commands except the throttle stick command and the RTH
button are available during descent and landing. The aircraft motors will turn off automatically
after landing. It is recommended to y the aircraft to a safe location before the semi-automatic
descent.
Radio Frequency Environment
1. Avoid using wireless devices that use the same frequency bands as the remote controller.
2. When using with multiple aircraft, including T40, T20P, and other aircraft, make sure that the distance
between each aircraft is more than 10 m to avoid interference.
3. The sensitivity of the radar module may be reduced when operating several aircraft within a short
distance. Operate with caution.
4. Be alert when flying near areas with magnetic or radio interference. These include, but are not
limited to, high voltage lines, large scale power transmission stations or mobile base stations, and
broadcasting towers. Failing to do so may compromise the transmission quality of this product or
cause transmission errors which may affect ight orientation and location accuracy. The aircraft may
behave abnormally or go out of control in areas with too much interference.
5. If the RTK dongle is used for eld planning, the module should be disconnected from the remote
controller after planning is completed. Otherwise, it will affect the communication performance of the
remote controller.
Use of Launch and Recovery Equipment
Not applicable.
Distance to Control Station
When taking off or landing, the aircraft should be more than 10 m away from the remote controller and
operator to ensure safety. Maintain visual line of sight with the aircraft at all times.
Loading ...
Loading ...
Loading ...