Loading ...
Loading ...
Loading ...
©
2023 DJI All Rights Reserved.
15
AGRAS T40/T20 P
Unmanned Aircraft Flight Manual
Using the Remote Controller
Powering the Remote Controller On and Off
Both the internal battery and external battery can be used to supply power to the remote controller. The
battery level is indicated via the battery level LEDs on the remote controller or on the external battery.
Follow the steps below to power on the remote controller:
1. When the remote controller is powered off, press the power button once to check the current battery
level of the internal battery. Press the battery level button on the external battery to check the current
battery level of the external battery. If the battery level is too low, recharge before use.
2. Press the power button once, then press and hold to power on the remote controller.
3. The remote controller beeps when powered on. The status LED glows solid green when linking is
complete.
4. Repeat Step 2 to power off the remote controller.
Charging the Batteries
1. Use the DJI 65W Portable Charger to charge both the internal and external batteries simultaneously.
Power Outlet
(100-240 V, 50/60 Hz)
Use the provided charger to charge the remote controller. Otherwise, use a locally certied
USB-C charger with a maximum rated power and voltage of 65 W and 20 V.
Fully charge and discharge the internal and external batteries of the remote controller at least
once every three months. The battery will deplete when it is stored for an extended period.
2. Use the WB37 Battery Charging Hub (USB-C) and 65W Portable Charger to charge the external
battery. Refer to the WB37 Battery Charging Hub (USB-C) User Guide for more information.
Power Outlet
(100-240 V, 50/60 Hz)
Loading ...
Loading ...
Loading ...