Loading ...
Loading ...
Loading ...
14
©
2023 DJI All Rights Reserved.
AGRAS T40/T20 P
Unmanned Aircraft Flight Manual
18. Spray/Spread Button
Press to start or stop spraying/spreading in
Manual operation mode.
19. Flight Mode Switch
The three positions of the switch correspond
to: N-mode (Normal), S-mode (Attitude), and
F-mode (Normal).
20. Internal RC Antennas
Relays aircraft control and image
transmission signals. Do not block the
internal RC antennas during use. Otherwise
the signals may be affected.
21. microSD Card Slot
Slot to insert a microSD card.
22. USB-A Port
For connecting devices such as the RTK
Dongle. When it is connected to the intelligent
charger or multifunctional inverter generator,
users can view the device status information
in DJI Agras.
23. HDMI Port
The output of the HDMI signal to an external
monitor.
24. USB-C Port
For charging the remote controller or connect
to a computer to update rmware and export
logs via the DJI Assistant 2 software.
25. FPV/Map Switch Button
In Operation View in DJI Agras, press to
switch between FPV and Map View.
26. Right Dial
Turn to adjust the tilt of the FPV camera.
27. Scroll Wheel (reserved)
28. Handle
29. Speaker
30. Air Vent
For heat dissipation. Do not block the air vent
during use.
31. Reserved Mounting Holes
32. Button C1
In A-B Route operation mode, press to add
Point A.
33. Button C2
In A-B Route operation mode, press to add
Point B.
34. Rear Cover
35. Battery Release Button
36. Battery Compartment
For installing the WB37 Intelligent Battery.
37. Rear Cover Release Button
38. Alarm
39. Air Intake
For heat dissipation. Do not block the air
intake during use.
40. Dongle Compartment
The USB-C connector in the compartment is
used to connect the DJI Cellular Dongle.
41. Strap Bracket
Loading ...
Loading ...
Loading ...