Loading ...
Loading ...
Loading ...
5. Under Wireless Charging, select On to enable wireless charging.
– or –
1. Press the OSD button on the back cover to open the OSD menu.
2. Select Power, and then select Wireless Charging.
3. Select On to enable wireless charging.
– or –
1. Press the OSD button on the right side of the back of the computer.
2. Select the menu icon to open the OSD menu.
3. Select Power, and then select Wireless Charging.
4. Select On to enable wireless charging or Off to disable wireless charging.
Shutting down (turning off) the computer
Although you can turn off the computer with the power button, HP recommends that you use the
Windows Shut down command.
IMPORTANT: Unsaved information is lost when the computer shuts down. Be sure to save your work
before shutting down the computer.
The Shut down command closes all open programs, including the operating system, and then turns off
the display and computer.
Shut down the computer under any of the following conditions:
● When you need to access components inside the computer
● When you are connecting an external hardware device that does not connect to a USB or video port
or to a headphone or microphone jack
● When the computer will be unused and disconnected from external power for an extended period
NOTE: If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly
pressing the power button.
To shut down your computer, follow these steps:
1. Save your work and close all open programs.
2. Select the Start button, select the Power icon, and then select Shut down.
If the computer is unresponsive and you cannot use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
● Press ctrl+alt+delete, select the Power icon, and then select Shut down.
● Press and hold the power button for at least 10 seconds.
● Disconnect the computer from external power.
10
Chapter 3 Getting to know your computer
Loading ...
Loading ...
Loading ...