User manual - Page 9

Cut out the work surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole. Be sure the thickness of

the work surface is at least 30mm. Please select heat-resistant and insulated work surface material (Wood and similar fibrous or

hygroscopic material shall not be used as work surface material unless impregnated) to avoid the electrical shock and larger

deformation caused by the heat radiation from the hotplate. As shown below::

Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and outlet are not blocked. Ensure

the ceramic cooker hob is in good work state. As shown below

The safety distance between the sides of the hob and the inner surfaces of the worktop should be at least 3mm.