Loading ...
Loading ...
Loading ...
6
ENG
How to use
Start cooking
Finish cooking
After power on, the buzzer beeps once, all the indicators light
up for 1 second then go out, indicating that the ceramic hob
has entered standby mode.
Touch the zone that you wish
to use
Place a suitable pan on the
cooking zone that you wish
to use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and
dry.
Select a heat setting by
touching the “-” or “+” control.
• If you don’t choose a heat
setting within 1minute,
the ceramic hob will
automatically switch off. You
will need to start again at
step 1.
• You can modify the heat
setting at any time during
cooking.
• By holding down either of
these buttons, the value will
adjust up or down.
To lock the controls
Touch the key lock control. The
indicator next to the key lock
will light up
To unlock the controls
Make sure the ceramic hob is turned on
Touch and hold the lock control for a while.
Turn the cooking zone off
by scrolling down to “-” or
touching “-” and “+” control
together
Turn the cooking off by
touching the ON/OFF
control.
OR
Beware of hot surfaces
“H” will show which cooking zone is
hot to touch. It will disappear when
the surface has cooled down to a
safe temperature. It can also be used
as an energy saving function if you
want to heat further pans, use the
hotplate that is still hot.
• You can lock the controls to prevent unintended use (for
example children accidentally turning the cooking zones
on).
• When the controls are locked, all the controls except the
ON/OFF control are disabled.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature
inside the ceramic hob. When an excessive temperature is
monitored, the ceramic hob will stop operation automatically..
Residual Heat Warning
When the hob has been operating for some time, there will
be some residual heat. The letter “H” appears to warn you to
keep away from it.
Default working times
Another safety feature of the hob is automatic shutdown. This
occurs whenever you forget to switch off a cooking zone. The
default shutdown times are shown in the table below:
Locking the Controls
Power level
Default working timer
(hour)
1 8
2 8
3 8
4 4
5 4
6 4
7 2
8 2
9 2
Loading ...
Loading ...
Loading ...