Loading ...
Loading ...
Loading ...
28 PawRunner User Manual Lifepro
Endurance Training Collection 29
Scan Speed
Mode
Speed
Time Dist. Cal.
OPERATING INSTRUCTIONS
USING THE CONTROL PANEL TO OPERATE THE PAWRUNNER
1. Window: Shows the value of the selected display mode: scan, speed, time,
distance, or calories burned. Scan mode shows the value of each mode in turn.
2. Display Mode LEDs: The LEDs indicate which display mode is currently selected:
scan, speed, time, distance, or calories burned.
3. Speed + / - Buttons: During exercise, use the buttons to increase/decrease
the speed from 0.5–7.5 mph, in 0.1 mph increments. In standby mode, use the
buttons to adjust the time before starting a preset program or to adjust the
settings when selecting a countdown mode: increase/decrease the time goal
from 5–99 minutes, in 1-minute increments, the distance goal from 0.4–99
miles, or the calorie goal from 10–990 kilocalories.
4. Start/Stop Button: Press once to start the selected preset program or
countdown mode workout. Press again to pause the workout. While paused,
press a third time to restart the workout.
5. Magnetic Safety Key Port: The magnetic safety key must be in place on the
magnetic port in order to begin using the treadmill.
6. Mode Button: In standby mode, press to toggle through the three countdown
modes: time, distance, calories, then the 12 preset programs (the window
shows: 30:00, 1.00, 50.0, P01–P12). During a workout, press the button
to toggle through the display modes in order: scan, speed, time, distance,
and calories burned. The Display Mode LEDs indicate which display mode is
currently selected.
6
1
2
3
4
5
*Speed cannot be adjusted
for preset programs.
USING THE REMOTE CONTROL TO
OPERATE THE PAWRUNNER
1. +/- Buttons*: During exercise, use the
buttons to increase/decrease the speed
from 0.5–7.5 mph, in 0.1 mph increments.
In standby mode, use the buttons to adjust
the time before starting a preset program
or to adjust the settings when selecting a
countdown mode: increase/decrease the
time goal from 5–99 minutes, in 1-minute
increments, the distance goal from 0.4–99
miles, or the calorie goal from 10–990
kilocalories.
2. Mode Button: In standby mode, press to
toggle through the three countdown modes:
time, distance, calories (the window shows:
30:00, 1.00, 50.0). During a workout, press the
button to toggle through the display modes in
order: scan, speed, time, distance, and calories.
The Display Mode LEDs on the control panel
indicate which display mode is currently selected.
3. Start/Stop Button: Press once to start the selected preset program or
countdown mode workout. Press again to pause the workout. While paused,
press a third time to restart the workout.
4. Program Button: Press to toggle through the twelve preset programs,
P01–P12.
*Speed cannot be adjusted for preset programs.
MODES
Standby Mode: The PawRunner is powered on, but no workout is in progress.
Program Mode: Choose from twelve preset programs: P1–P12.
Countdown Mode: Choose between time, distance, and calorie countdown modes.
P
M
1
1
2
3
4
Loading ...
Loading ...
Loading ...