Loading ...
Loading ...
Loading ...
18 PawRunner User Manual Lifepro
Endurance Training Collection 19
INSTALL THE CONSOLE
You will need: console and adjustment post (I)
8
LUBRICATE THE RUNNING BELT
Before using your PawRunner treadmill for the first time, you must
lubricate the running belt with the included bottle of maintenance
oil (P). Follow the steps in
LUBRICATING THE RUNNING BELT on
page 38.
9
1. Ensure the console cable exists the bottom of the adjustment post (I).
Pull the end of the cable out of the bottom of the post, if necessary.
2. Insert the adjustment post (I) into the T-knob post (K).
3. Turn the T-knob (J) clockwise to tighten it and secure the console and
adjustment post to the treadmill.
4. Pull the console cable through the bottom of the T-knob post.
5. Connect the console cable with the corresponding cable exiting the
right side of the treadmill.
I
J
K
I
J
CUSTOMIZING THE TREADMILL
ADJUSTING THE CONSOLE HEIGHT AND VIEWING ANGLE
The console may be raised or lowered and rotated from side to side for
easy viewing.
1. Loosen the T-knob by turning it counterclockwise.
2. Slide the console up or down to the desired height.
3. Rotate the adjustment post from side to side until the console is facing
the desired direction.
4. Tighten the T-knob by turning it clockwise to secure the console in place.
The console may be tilted up and back via the tilt adjustment knob. There are
two tilt options.
1. Loosen the tilt adjustment knob by turning it counterclockwise.
2. Tilt the console up or back to the desired angle.
3. Tighten the tilt adjustment knob by turning it clockwise.
ADJUSTING THE INCLINE OF THE TREADMILL
The treadmill deck can be tilted to three different incline levels: 4.5°, 5.1°,
and 5.7°. The treadmill arrives at the lowest level. To adjust the tilt:
1. Twist the two incline adjustment knobs counterclockwise to loosen them.
2. Hold the base of the treadmill with one hand. With your other hand, pull
the head of the knob out as you pull the incline adjustment post down.
You will hear a click with the incline adjustment knob clicks into the
next incline level. Repeat with the second knob.
3. Adjust until the incline is at your desired angle.
1 2 3
Loading ...
Loading ...
Loading ...