Loading ...
Loading ...
Loading ...
16 PawRunner User Manual Lifepro
Endurance Training Collection 17
ATTACH THE FABRIC SIDE PANELS TO THE SIDEBARS
You will need: left fabric side panel (G), right fabric side panel (H)
6
A
G
E
F
H
INSTALL THE T-KNOB AND T-KNOB POST
You will need: T-knob (J), T-knob post (K), hex key (N)
7
1. Screw the T-knob (J) clockwise into the threaded insert in the side of
the T-knob post (K). Do not fully tighten the knob yet.
2. Locate the metal tube running along the right side of the treadmill
baseframe (A).
3. Locate the two socket-head screws inserted into the metal tube
towards the front of the treadmill.
4. Use the hex key (N) to remove the two screws.
5. Align the T-knob post (K) with the two screw holes. The lip on the
T-knob post goes UP.
6. Re-insert the two socket-head screws to secure the T-knob post.
7. Use the hex key (N) to fully tighten the screws.
K
J
TOOLS & HARDWARE
(N)
1. Identify the left fabric side panel (G): the Velcro
®
tabs on the backside
of the fabric side panels face to the INSIDE. The tabs on the backside
of the left panel face RIGHT; the tabs on the backside of the right
panel face LEFT. See figure below.
2. Stick the bottom strip of Velcro
®
on the back of the left fabric side
panel (G) to the corresponding Velcro
®
strip along the left side of the
baseframe (A).
3. Stick the five Velcro
®
tabs on the back of the left side panel (G) to the
corresponding tabs on the left sidebar (E) and crossbar (C). Reposition
the tabs along the sidebar and crossbar, if necessary to line up the
Velcro
®
.
4. Repeat steps 2–3 to attach the right fabric side panel (H) in the same
manner.
Loading ...
Loading ...
Loading ...