3-in-1 Soil Detector
Instruction Manual
Use Method
1、Insert the probe into the soil as deep as possible, about 2/3 of the
overall depth (at least 10CM or more) to be more accurate.
2、Toggle the key on the pen to ﹤MOIST﹥, ﹤MOIST﹥ means humidity, please
read the value corresponding to the column of "DRY_WET" on the pointer table.
DRY means dry.
WET means wet.
The values 1-3 (red part) indicate the need for watering.
Values 4-7 (in green) indicate proper watering, please adjust the watering
time according to the plant species.
The value 8-10 (blue part) indicates that the soil contains more water,
please pay attention to it.
3、Toggle the key on the pen to ﹤LIGHT﹥, ﹤LIGHT﹥: indicates the lightness,
please read the value according to the column of "DARK-LIGHT" on the pointer
table.
DARK means dark.
LIGHT means bright.
The greater the value, the stronger the light is. Please decide whether shade
is needed according to the plant species.
4、Toggle the key on the pen to ﹤PH﹥, ﹤PH﹥: indicates acidity and
alkalinity, please read the value according to the column of "ALKALINE-
ACIDIC" on the pointer table.
ALKALINE means alkali.
ACIDIC means acid.
The smaller the value, the greater the acidity. Please adjust the soil pH
according to the plant species.
5. Note that the dial has three tables for identification. The upper, middle
and lower table numbers, please read the above instructions carefully.
Special Attention: On The Issue of Breeding Soil
This soil detector instrument, as the name implies, the product name is
called soil detector, it can only be used for soil, clay and other soil with
a weak static electricity to work, does not guarantee that it can be used
for: nutrient soil, granular soil, vitriol and other non-conventional soil.
Because the detector is not sure whether such soil with elements can be
effective power generation work. Especially nutrient solution, water, vinegar
and other liquids. Will damage the detection principle function of the
detector. Especially some pots inside no soil at all, are wood bran and other
things, all rely on nutrient solution plants and flowers are not able to use
the detector.
Battery Working Principle Explanation [No Battery]
Instrument without batteries, plug and play, soil detector without batteries,
the principle of power generation is: the earth itself is with a magnetic
field, static electricity and other micro-heat electrical energy and then
detector internal is a current meter conductive, plus the soil itself with
trace elements for pointer detection and then feedback.
Warning
1, The detector can not be used for water, vinegar, fish tank and other
liquid detection! Easily damaged. Suitable for soil, potting soil, etc.
2, Please insert a small amount of water to wet the soil before the detection
of moisture, the probe needs to enter the soil about 2/3 (10CM above) to
ensure the accuracy of the test results. The deeper you insert the better,
the more accurate the results]
3, Please do not use excessive force to vigorously insert the soil, so as
not to damage the probe. Especially with small stones, please do not insert
brute force.
4, After use, please clean the probe, paper towel dry towel to prevent rust,
keep dry storage.
5, This product is called "soil" detector, can only be used for soil, mud,
etc.. Can not be used for all gravel or straw pile, vitrified granular soil.
6、Reference to the dial of the instrument need to correspond to different
functions to see different data, please read carefully
